8 Disassembly and Assembly Instructions
8.1.Outdoor Unit
8.1.1.CU-E9GFE-2 CU-E12GFE-2
1. Remove the 3 screws of the Top Panel.
• Be save to return the wiring to its original position
• There are many high voltage components within the heat sink cover so never touch the interior during operation. Wait at least two minutes after power has been turned off.
5. Remove the Control Board as follows:
Fig. 13
2. Remove the 6 screws of the Front Panel.
Fig. 16
Fig. 14
3.Remove the screw of the Terminal Board Cover.
4.Remove the Top Cover of the Control Board by 4 hooks.
Fig. 17
Fig. 15 | Fig. 18 |
21