SAFETY PRECAUTIONS

DEFINITION

To prevent personal injury, injury to others, or property damage, please observe the following.

Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below:

Warning

This sign warns of death or serious

injury.

The instructions to be followed are classified by the following symbols:

Caution

This sign warns of injury or damage

to property.

This symbol denotes an action that is

These symbols denote actions

PROHIBITED.

that are COMPULSORY.

Warning

Remote Control

Indoor Unit

During Operation

During Installation

Caution

Indoor Unit

During Installation

Do not use rechargeable (Ni-Cd) batteries.

Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries.

Remove the batteries if the unit is not going to be used for a long period of time.

New batteries of the same type must be inserted following the polarity stated to prevent malfunction of the remote control.

Do not install, remove and reinstall the unit by yourself; improper installation will cause leakage, electric shock or fire. Please consult an authorized dealer or specialist for the installation work.

During Operation

Do not insert your fingers or other objects into the indoor or outdoor unit.

Do not attempt to repair the unit by yourself.

Do not install the unit in a potentially explosive atmosphere.

Ensure that the drainage pipe is connected properly. Otherwise, leakage

may occur.

During Operation

Do not wash the unit with water, benzene, thinner or scouring powder.

Do not use for other purposes such as preservation of food.

Do not use any combustible equipment in front of the airflow outlet.

Do not expose directly to cold air for a long period.

Air

outlet

Power Supply

During Installation

This equipment must be earthed and installed with ELCB. Otherwise, it may cause electrical shock or fire in case of malfunction.

During Operation

Do not share the same power outlet with other equipment.

Do not modify power cords.

Do not use extension cords.

Do not operate with wet hands.

Use the specified supply cord.

If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• In case of emergency or abnormal conditions (burnt smell, etc), turn off the power supply, and consult your nearest dealer.

Air

inlet

Air

inlet

Air

inlet

Air

outlet

• Aerate the room regularly.

Power Supply

During Operation

• Switch off the power supply before cleaning or servicing.

Turn off the power supply if the unit is not used for a long period of time.

This air conditioner is equipped with a built-in surge protective device. However, in order to further protect your air conditioner from being damaged by abnormally strong lightning activity, you may want to disconnect it from the power supply. Do not touch the air conditioner during lightning, it may cause electric shock.

Outdoor Unit

During Installation

Ensure that the drainage pipe is connected properly. Otherwise, leakage

may occur.

During Operation

Do not sit or place anything on the indoor or outdoor unit.

After long periods of use, make sure the installation rack is not damaged.

2

Page 2
Image 2
Panasonic CU-E12GKE Safety Precautions, Definition, Remote Control Indoor Unit, Power Supply, Outdoor Unit

CU-E12GKE specifications

The Panasonic CS-E9GKEW and CU-E12GKE air conditioning units are part of Panasonic’s advanced HVAC solutions, designed to provide optimal comfort and energy efficiency for residential and commercial spaces. Notably, the models F565488, CU-E9GKE, and CS-E7GKEW complement this range, sharing cutting-edge technologies and features that set them apart in the competitive market.

One of the standout features of these units is the inverter technology. This innovation enables the compressor to adjust its speed according to the cooling demand, leading to significant energy savings while maintaining a consistent indoor temperature. By avoiding the frequent on-off cycling seen in traditional air conditioning systems, the inverter technology not only reduces power consumption but also results in quieter operation—a crucial factor for home and office environments.

The CS-E9GKEW and CS-E7GKEW variants come equipped with a powerful yet quiet fan that enhances air distribution, ensuring every corner of a room is adequately cooled or heated. The units boast a sleek and modern design that enables seamless integration into any décor while offering easy-to-use controls.

Panasonic prioritizes user comfort, evident in the addition of features like the Intelligent Sensor that detects human activity within the room. If the sensor finds no occupants, the system automatically adjusts its operation to save energy, ensuring the air conditioning is only working when necessary.

The dual functionality of cooling and heating allows these models to be used year-round, making them versatile choices for diverse climates. The heating capability is particularly beneficial in transitional weather, providing warmth when needed without switching systems.

Another notable aspect is the advanced air purification technology integrated into these systems. Panasonic’s Nanoe-G technology effectively reduces airborne pollutants, ensuring that the air quality remains high. This feature is especially important for allergy sufferers or those living in urban areas with higher levels of dust and particulates.

The CU-E12GKE and CU-E9GKE outdoor units are designed to withstand various environmental conditions, featuring robust construction and enhanced corrosion-resistance. This durability ensures longevity and performance, even in harsh weather.

In summary, the Panasonic CS-E9GKEW, CU-E12GKE, F565488, CU-E9GKE, and CS-E7GKEW units offer a blend of energy efficiency, advanced technology, and user-focused features. With their sleek designs, powerful performance, and commitment to air quality, these air conditioning solutions are ideal for those looking to enhance comfort in their living or working spaces while being mindful of energy consumption.