Panasonic CU-E12GKE Care & Cleaning, Switch off the power supply before cleaning, Front Panel

Models: CU-E12GKE

1 14
Download 14 pages 8.79 Kb
Page 6
Image 6
CARE & CLEANING

CARE & CLEANING

Switch off the power supply before cleaning

e-ion AIR PURIFYING SYSTEM

Switch off the power supply before cleaning Do not touch during operation

e-ion FILTERS

Clean the filters regularly.

Wash/rinse the filters gently with water to avoid damage to the filter surface.

Dry the filters thoroughly under the shade, away from fire or direct sunlight.

Replace any damage filter.

Part no.: CWD00K1001 (Left and Right)

FRONT PANEL

Raise and pull to remove. Wash gently and dry.
ACTIVE e-ion POWER MODULE

ACTIVE e-ion GENERATOR

Clean with dry cotton bud.

• Active e-ion generator cleaning is recommended every 6 months.

INDOOR UNIT

Wipe the unit gently with a soft, dry cloth.
Remove

AIRFLOW DIRECTION LOUVER

AUTO OFF/ON BUTTON

To operate the air-conditioner when the remote control is misplaced or malfunctioned.

ActionMode

Press once.

Automatic

 

 

Press and hold until you hear one beep,

Cooling

then release.

 

 

 

Press and hold until you hear one beep

 

then release.

Heating

Press and hold until you hear two beeps

 

then release.

 

• To turn off, press the AUTO OFF/ON button again.

WASHING INSTRUCTIONS

Do not use benzene, thinner or scouring powder.

Use only soap (e-ion AIR PURIFYING SYSTEM pH7) or neutral household detergent.

Do not use water hotter than 40°C.

e-ion FILTERS Hints FRONT PANEL

Clean the filter regularly for best performance and to reduce power consumption.

Please consult your nearest dealer for seasonal inspection.

6

Page 6
Image 6
Panasonic CU-E12GKE Care & Cleaning, Switch off the power supply before cleaning, e-ionAIR PURIFYING SYSTEM, Front Panel