AUTO, HEAT, COOL, DRY
2 | AUTO |
|
| FAN |
|
HEAT |
|
| SPEED | 1 | |
|
| AIR | |||
COOL |
|
| |||
|
| SWING | |||
DRY |
|
| |||
|
|
| |||
Select the | OFF |
|
|
| |
OFF |
|
| ON | Start the | |
desired | TIMER | TIMER | |||
MODE OFF/ON |
| operation. | |||
operation. |
| ||||
| QUIET |
|
| FAN SPEED |
|
| POWERFUL TEMP AIR SWING |
| |||
| TIMER |
|
| SET | 3 |
| ON |
|
| ||
| 1 |
| 2 | 3 | |
| OFF |
|
| CANCEL | Set the |
| SET | CLOCK | RESET | temperature. | |
|
| ||||
|
|
|
|
●Supersonic air purifying device (super
●POWERFUL and QUIET operations are available in all modes.
●Press OFF/ON again to stop the operation.
■Operation Details
AUTO - Automatic Operation
•Unit selects the operation mode according to the room temperature.
•Once the operation mode is selected, the unit will operate at the standard setting temperature as shown:
Room | Operation |
| Standard | ||||
| setting | ||||||
temperature | mode |
|
| ||||
| temperature | ||||||
|
|
|
|
| |||
23°C & | Cool |
|
|
|
| 25°C | |
above |
|
|
|
| |||
|
|
|
|
|
|
| |
Below | Dry |
|
|
|
| 22°C | |
23°C |
|
|
|
| |||
|
|
|
|
|
|
| |
Below | Heat |
|
|
|
| 21°C | |
20°C |
|
|
|
| |||
|
|
|
|
|
|
| |
• Press | or |
| to change the | ||||
temperature setting to “HI” or “LO” | |||||||
as shown: |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Operation mode |
|
| HI |
| LO | ||
|
|
|
|
|
| ||
Cool |
|
| 27°C |
| 23°C | ||
|
|
|
|
|
| ||
Dry |
|
| 24°C |
| 20°C | ||
|
|
|
|
|
| ||
Heat |
|
| 23°C |
| 19°C | ||
|
|
|
|
|
|
|
|
HEAT - Heating Operation
•In heating mode, it takes a while for the unit to warm up. The power indicator blinks during this operation.
•The range of temperature can be selected from 16°C ~ 30°C.
COOL - Cooling Operation
•Enjoy cool air at your desired temperature.
•The range of temperature can be selected from 16°C ~ 30°C.
DRY - Soft Dry Operation
•Keep your environment dehumidified by running cooling operation at a low fan speed.
•The range of temperature can be selected from 16°C ~ 30°C.
■Hint
•A temperature setting 1°C higher in cooling operation or 2°C lower in heating operation than the desired temperature equates to a 10% power saving.
ENGLISH
Troubleshooting
● Mist emerges from indoor unit. | ► Condensation effect due to cooling process. |
● Heating/Cooling operation does not work. | ► Ensure temperature is set correctly. |
| ► Make sure windows and doors are closed. |
| ► Make sure filters are cleaned and replaced. |
| ► Make sure inlet and outlet vents are cleared. |
|
|
● Water flowing sound during operations. | ► Cause by refrigerant flow inside the unit. |
|
|
●The power indicator blinks during the operation and ► The unit is in defrost mode, and the melted frost is drained from the
the indoor fan is stopped. | outdoor unit. |
5