Panasonic CW-XC120HU, CW-XC100HU manual Installation Kits Contents, Suggested Tool Requirements

Installation Kits Contents

1	2	3	4
5	6	7	8	11	9
10
12

NO.	NAME OF PARTS	Q'TY
1	FRAME CURTAIN	2
2	SILL SUPPORT	2
3	BOLT	2
4	NUT	2
5	SCREW(TYPE A) (10mm (25/64"))	16
6	SCREW(TYPE B)D5.1mm (3/16")/16mm (5/8")	3
7	SCREW(TYPE C) D4.1mm (5/32")/16mm (5/8")	5
8	FOAM-STRIP	1
9	FOAM-PE (600mm x 25mm x 2mm)	1
10	WINDOW LOCKING BRACKET	1
11	FOAM-PE (920mm x 30mm x 2mm)	1
12	DRAIN PIPE	1

■Top retainer bar is in the product package.

Suggested Tool Requirements

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL

PREPARATION OF CHASSIS

1.Remove the screws which fasten the cabinet at both sides and at the back.

2.Slide the unit from the cabinet by gripping the base pan handle and pulling while bracing the cabinet.

3.Cut the window sash seal to the proper length.

Peel off the backing and attach the FOAM-PE

to the underside of the window sash.

4.Remove the backing from the top upper guide

FOAM-PE and attach it to the bottom of the upper guide

5.Attach the upper guide onto the top of the cabinet with 3 type A screws.

6.Insert the Frame Curtain into the upper guide.

7.Fasten the curtains to the unit with 4 Type A screws.

11

(Type A)

5

Shipping

Screws

9

Lower guide

Features and Installation

5

5

(Type A)

11