Panasonic CW-XC120HU, CW-XC100HU manual Bottom PAN

9.Attach each Frame curtain to the window sash using screws (Type C). (See Fig. 6)

CAUTION: DO NOT DRILL A HOLE IN THE

BOTTOM PAN.

The unit is designed to operate with approximately 1/2" (12.7mm) of water in bottom pan.

10. Slide the unit into the cabinet. (See Fig. 7)

CAUTION: For security purpose, reinstall screws at cabinet's sides.

11.Cut the foam-strip to the proper length and insert between the upper window sash and the lower window sash.

(See Fig. 8)

Type C 7

Fig. 6

	Power cord
Screw
Screw	Fig. 7

Foam-Strip 8

Fig. 8

12.Attach the window locking bracket with a type C screw. (See Fig. 9)

13.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place. (See Fig.10)

NOTE: Please refer page 7 for setting the ventilation knob.

14.Lift the inlet grille and secure it with two type A screw through the front grille. (See Fig. 11)

15.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.

Window locking bracket 10

Fig. 9

Fig. 10

Fig. 11

Features and Installation

13