About the Controls on the Air Conditioner
5

About the Controls on the air conditioner

The controls will look like the following.

Controls

hr

F

FAN
COOL
DRY
ECONOMY
FAN
SPEED
MODE
TEMP
OPERATION
OFF/ON
TIMER
ON/OFF TIMER
- STOPPING OPERATION
Every time you push this button, when the unit is operating,
timer is set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours
7Hours 8Hours 9Hours 10Hours 11Hours 12Hours Cancel)
The Setting Temperature will be raised by 2°F (1°C) 30 min. later
and by 2°F (1°C) after another 30 min.
- STARTING OPERATION
Every time you push this button, when the unit is
not operating, timer is set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours
7Hours 8Hours 9Hours 10Hours 11Hours 12Hours Cancel)
MODE
Every time you push this button, it will toggle between
COOL, ECONOMY, FAN and DRY.
POWER
To turn the unit ON, push the button. To turn the unit OFF,
push the button again.
This button takes priority over any other buttons.
When you first turn it on, the unit is on the High cool mode
and the temperature is set at 72°F (22°C).
TEMPERATURE SETTING
This button can automatically control the temperature
of the room. The temperature can be set within a range of
60°F (16°C) to 86°F (30°C) by 1°F (1°C).
Select a lower number for a lower temperature in the room.
FAN SPEED
Every time you push this button it is set as follows.
{High(F2)
Low(F1)
High(F2)...}.
DRY
When this unit is in dry mode, the fan rotates at low speed.
The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and the unit
checks the room air temperature to set itself.