6
About the Controls on the Air Conditioner
Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Controller and the air conditioner.
1. Remove the cover from the back of the
remote
controller
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Do not use rechargeable batteries.
Such batteries
differ from standard dry cells in
shape, dimensions, and
performance.
• Remove the batteries from the
remote controller if the air
conditioner is not going to be used
for an extended length of time.
• Keep the remote control away from
infants and small children to
prevent them from accidentally
swallowing the batteries.
How to Insert Batteries
OPERATION
TEMP
TIMER
MODE
ECONOMY
FAN SPEED
ROOM TEMPERATURE SETTING BUTTON
ECONOMY
ON/OFF TIMER BUTTON
OPERATION BUTTON
FAN SPEED SELECTION BUTTON
OPERATION MODE SELECTION BUTTON
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F (22°C).
•
Every time you push this button, it will toggle between COOL, ECONOMY, FAN
and DRY.
• If you push this button, the fan stops when the compressor stops cooling. Approximately every
3 minutes the fan will turn on and check the room air to determine if cooling is needed.
• You can set the time when the unit will turn on or turn off automatically by pressing the timer
button. If the unit is in operation, this button controls the time it will be turned off. If the unit is
in off state, this button controls the time it will start. Every time you push this button, the
remaining time will be set as follows:
- STOPPING OPERATION
• Every time you push this button, when the air conditioner is operating, timer is set as
follows : (1Hour
→
2Hours
→
3Hours
→
4Hours
→
5Hours
→
6Hours
→
7Hours
→
8Hours
→
9Hours
→
10Hours
���
11Hours
→
12Hours
→
0Hour
→
1Hour
→
2Hours
→
...)
• The Setting Temperature will be raised by 2°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.
- STARTING OPERATION
• Every time you push this button, when the air conditioner is not operating, timer is set as
follows : (1Hour
→
2Hours
→
3Hours
→
4Hours
→
5Hours
→
6Hours
→
7Hours
→
8Hours
→
9Hours
→
10Hours
→
11Hours
→
12Hours
→
0Hour
→
1Hour
→
2Hours
→
...)
Every time you push this button, it is set as follows.
{High(F2)
→
Low(F1)
→
High(F2)...}.
This button can automatically control the temperature of the room. The temperature
can be set within a range of 60°F to 86°F by 1°F. (16°C to 30°C by 1°C)
Select a lower number for a lower temperature in the room.