– 154 –
Inspections Before Shooting
(2) Inspection of Audio Level Automatic Adjustment Functions
1Set the AUDIO SELECT CH1/CH2 switch to AUTO.
2Set the AUDIO IN CH1/CH2 switch to FRONT [MIC].
3Aim a microphone connected to the MIC IN jack at an appropriate sound source and check
that the level display for both CH1 and CH2 changes in accordance with the sound level.
(3) Inspection of Audio Level Manual Adjustment Functions
1Set the AUDIO IN CH1/CH2 switch to FRONT [MIC].
2Set the AUDIO SELECT CH1/CH2 switch to MAN.
3Turn the AUDIO LEVEL CH1/CH2 controls and check that the level display increases when
the controls are turned to the right.
(4) Earphone and Speaker Inspections
1Set the VTR SAVE/STBY switch to STBY.
2Turn the MONITOR control and check that the speaker volume changes.
3Connect an earphone to the PHONES jack. Check that the sound to the speaker is cut off and
that the microphone sound can be heard from the earphone.
4Turn the MONITOR control and check that the earphone volume changes.
(5) Inspections when Using an External Microphone
1Connect an external microphone to the AUDIO IN CH1 and CH2 connectors.
2Set the AUDIO IN CH1/CH2 switch to REAR [MIC].
3Aim the microphone at a sound source and check that the audio level meter in the display
window and the audio level display inside the viewfinder change in accordance with the
sound level. Each channel can also be checked separately by connecting a single micro-
phone to each channel.
(6) Time Code and User Bit-Related Inspections
1Set the user bit as necessary.
ÁSee “Setting the User Bit” (page 84) for a description of setting methods.
2Set the time code.
ÁSee “Setting the Time Code” (page 83) for a description of setting methods.
3Set the F-RUN/R-RUN switch to R-RUN.
4Press the VTR START button.
Check that the tape runs and the counter display number changes.
5Press the VTR START button again.
Check that the tape stops and the counter display number stops changing.
6Set the F-RUN/R-RUN switch to F-RUN.
Check that the counter display number changes regardless of the tape running status.
7Set the DISPLAY switch to UB.
Check that the set user bit is displayed.