Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic AJ-D610WAP, D610WA operating instructions 1, 2, 3

1 158

Download 158 pages, 2.8 Mb

–78–

Setting the Electronic Shutter

Setting the Shutter Mode/Speed

¡The shutter speed during shutter mode and standard mode is set by the SHUTTER switch.

¡During SYNCHRO SCAN mode, the shutter speed can be set beforehand at the SYNCHRO

SCAN page of the setting menu. In the SYNCHRO SCAN mode, the shutter speed can easily be

changed using the SYNCHRO (“o” and “p”) buttons. (It can also be set using the UP or DOWN

button.)

¡The shutter speed selection range can be limited to the required range and whether to use

special operation modes (SYNCHRO SCAN or SUPER V) can be selected at the SHUTTER

SPEED page of the setting menu.

1Set DISP MODE on the “VF DISPLAY” SUB menu page of MAIN menu screen 2 of 4 to “2” or

“3” by following the steps outlined in “Changing the Display Mode” (page 62).

2Press the SHUTTER switch from the ON position to the SEL side. The current shutter setting

appears in the setting change message display position on the viewfinder screen.

Ex.: 1/120, 1/60.8, etc.

3Press the SHUTTER switch to the SEL side repeatedly until the desired mode or speed ap-

pears. When all modes and speeds can be displayed, the display changes in the order shown

below. If the required shutter speeds and modes have been designated beforehand, only the

designated speeds or modes appear.

¡When the unit is shipped from the factory, SUPER V mode is not specified and is therefore

not displayed.

SHUTTER Switch

SYNCHRO SCAN Mode

Standard Mode

SUPER V Mode

1/100 1/120 1/250 1/500 1/1000 1/2000

Contents

Main For your safety CAUTION: SHOCK HAZARD AND ANNOYING INTER- FERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. WARNING: SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Page Contents General and Features Features of the Camera Section Page Page Features Features of the VTR section System Configuration Camera/VTR AJ-D610WA Power Supply Section Accessory Mounting Section Audio Function Section (1) Audio Function Section (2) Audio Function Section (3) Shooting (Recording)/Playback Function Section (1) Shooting (Recording)/Playback Function Section (2) Shooting (Recording)/Playback Function Section (3) Shooting (Recording)/Playback Function Section (4) Page Menu Operation Section Time Code-Related Section (1) Time Code-Related Section (2) Warning/Status Display Section Page Page Page Page Page Page Checking and Selecting the Type of Battery To check the type of battery 1 To select the type of battery 1 Lower the lens clamping lever and clamp the lens. Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Connecting the AQ-EC1 Extension Control Unit (Option) Displaying the Setting Menu Inside the Viewfinder Setting Menu Configuration MAIN MENU SUB MENU Checking and Selecting the Master Gain Settings Checking and selecting the master gain setting 1 to SET while the HOLD button is held down. 2 3 Selecting the Color Bar Setting Selecting the color bar setting 1 to SET while the HOLD button is held down. 2 Checking the DIAGNOSTIC Screen Setting 1 2 3 DIAGNOSTIC screen settings. 4 Changing the setting menu configuration Transferring to the MAIN menus and SUB menus Basic Setting Menu Operations To display a SUB menu directly (user mode) 1 To display a MAIN menu directly (engineer mode) button are held down together. MAIN menu screen 1 of 4 now appears. SHIFT/ITEM Switch UP Button DOWN Button 1 PAGE button Operation moves to the MAIN menu. Each time the button is pressed, the MAIN menu screen is advanced by one page (1>2>3>4>1>, etc.). To transfer from a MAIN menu to a particular SUB menu 1 When this button is pressed, the cursor (arrow) indicating the selected item moves to the SUB menu. 2 Operation is now switched to the selected SUB menu. To transfer from a SUB menu to the MAIN menu 1 PAGE button SHIFT/ITEM button Operations on SUB menus Selecting the desired item 1 Changing the settings Changing the ON/OFF selection Returning to the default settings Quitting the menu Page Lamp Displays Inside the Viewfinder Setting the ! Lamp display 3 4 5 6 EX2 1/250 30-25 14.6V NiCd12 1 A 0dB F5.6 T_M1 ------- 1 2 3 4 5 E Selecting Display Items Select the items to be displayed on the viewfinder screen. 3 4 5 6 7 Display Mode and Setting Change Message Changing the Display Mode 3 4 5 6 7 Setting the Marker Displays 1 2 3 Page WIDE 0 See Warning System (page 149) for a detailed description. h min s frm Display Remaining Battery Level and Audio Level Displays VTR Section Operation/Status-Related Displays WIDE 0 Display Time Code-Related Displays Adjusting the Time and Date Adjustment and setup using the setting menu 3 4 5 6 7 Adjustments and Setup Using the Setting Menu Setting the Gain Selector Value Setting the gain selector value 2 3 4 5 6 7 Selecting Functions 3 4 5 6 7 Adjusting the White Balance 1 2 Page 8 When the White Balance Cannot be Automatically Adjusted Error messages related to white balance adjustment When there is no Time to Adjust the White Balance When the ON setting has been selected for FILTER INH Page 4 Shutter Modes Shutter modes and shutter speeds which can be selected Setting the Shutter Mode/Speed 1 2 3 Page Changing the Shutter Speed/Mode Selection Range 3 4 5 6 7 Changing the lris Automatic Adjustment Reference Value Page Adjusting the Audio Level 4 -40 -30 -25 -20 -15 -10 -5 0 E Page Page Page Setting the Time Data Setting Time Data Using the user data User data operation Setup Card Handling Setup Card Data Operations 5 6 7 8 Page Writing set data to cards button are held down together. 5 6 7 shown below appears. 8 Protecting stored data When data is not written Reading out data stored on cards 5 6 7 8 When data is not read out Page Cassettes Ejecting cassettes Preventing Accidental Erasure Page Page Page Page Page PlaybackChecking Recorded Contents Rec Review Color Playback Connection With an External VTR Precautions When Connecting an External VTR Recording Simultaneously with the Internal VTR and an External VTR Connections Checking the Function Settings Starting Recording 1 2 Page Recording With an External VTR Instead of the Internal VTR Using the 26-pin/12-pin Output Adaptor Connections Mounting the 26-pin/12-pin output adaptor 1 Recording With an External VTR Instead of the Internal VTR 2 RET Button Page MAIN menu screen 1 of 4 MAIN menu screen 2 of 4 MAIN menu screen 3 of 4 MAIN menu screen 4 of 4 Menu screen display methods ROP screen MATRIX screen LOW SETTING screen MID SETTING screen HIGH SETTING screen ADDITIONAL DTL screen SKIN TONE DTL screen KNEE/LEVEL screen FLARE/GAMMA screen CAMERA SETTING screen VF DISPLAY screen Page VF INDICATOR screen CAMERA ID screen SHUTTER SPEED screen SYNCHRO SCAN screen ! LED screen CAMERA SW MODE screen SUPER GAIN screen VTR FUNCTION screen Page BATT/TAPE ALARM screen Page CARD R/W SELECT screen REC (ASPECT)/RET screen MIC/AUDIO screen Page GENLOCK/IRIS screen VIDEO OUT screen TIME/DATE screen LENS SEL/ADJ screen USER MENU SEL 1 of 3 screen USER MENU SEL 2 of 3 screen Page AUTO SHADING screen EVALUATION screen S/N measurement screen Modulation measurement screen Resolution measurement screen Sensitivity measurement screen INITIALIZE screen DIAGNOSTIC screen Page Warning System Page Cleaning the Video Heads Cleaning the Viewfinder Characteristic Phenomenon of CCD Cameras Maintenance Condensation Page Page Page Page General Camera Section Viewfinder (AJ-VF10P, optional accessory) VTR Section VTR Audio System VTR Tape Travel System Connectors Input Output Related Components