Preparation
15
Inserting the Card
[Preparation]
Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the card]
1
Slide the
door in
the direction of the
arrow to open the Memory Card/battery
door.
2Insert the card all the way in until it
clicks.
Check the direction of the card.
Do not touch the connection terminals on the
back side of the card.
3Close the Memory Card
/battery
door.
[Removing the card]
4
Slide the
door to
the direction of the
arrow to open the Memory Card/battery
door.
5Press the card to release.
6Pull the card out.
7Close the
Memory Card/battery
door.
If you are using a MultiMediaCard type memory
card and the battery card cannot close, the card
may be installed backwards. Remove the card
and reverse it, then try to close the door again.
If the card cannot be fully inse rted, verify whether
the direction of the card is correct.
We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
If the card is not fully inserted, the card may be
damaged.
4
1

3,7

2