Preparation
17
Turning Power on/off1
Set the power switch to [ON].
• The Status indicator
1
lights.
2
Set
the power switch to [OFF].
• When the power switch is turned on, do not hold the lens cover. If th e lens cover does not
open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.
• When turning the power switch off, do not hold the lens cover. If the len s co v er does no t
close, the power turns off with it opened. Turn the power switch on and off.
• When turning on the power in the recording mode, do not put any obstacl e in front of the
lens.
ª Status Indicator A
Lighting:
• When turning the power switch to [ON].
Blinking:
• While the focus is being adjusted or the
focus is not properly adjusted.
• When the card is not inserted.
• When no space is left on the card.
• When the remaining battery power is low.
(blink slowly)
ª Flash/Access Indicator B
Lighting:
• When accessing the card.
• When the flash fires. (It lights when the
shutter is pressed halfway)
• When sending data to PC.
Blinking:
• When charging the flash.
• When setting the flash mode to forced off
and recording in dark places (blink slowly.)
OFF ON