Panasonic DMC-FH3, DMC-FH20, DMC-FH1 Inserting and Removing the Card optional/the Battery

Inserting and Removing the Card (optional)/the Battery

•Check that this unit is turned off.

•We recommend using a Panasonic card.

Slide the release lever in the direction of the arrow and open the card/battery door.

• Always use genuine Panasonic batteries (CGA-S/106B; supplied or DMW-BCF10PP; optional).

•If you use other batteries, we cannot guarantee the quality of this product.

Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.

Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

B: Do not touch the connection terminals of the card.

• The card may be damaged if it is not fully inserted.

1:Close the card/battery door.

2:Slide the release lever in the direction of the arrow.

(ENG) VQT2K50 15