Charging battery
■■About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCH7PP.
It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as
a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.
••Use the dedicated charger and battery.
••The camera has a function for distinguishing batteries which can be used safely. The dedicated battery
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On: Charging in progress (approx. 110 min. if fully depleted)
Off: Charging complete
Detach the battery after charging is completed
■■Guidelines for number of recordable pictures and recording time
this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries
Number of recordable pictures
Recording time
Playback time
Approx. 300 pictures
Approx. 150 min
Approx. 260 min
which have been manufactured by other companies and are not genuine Panasonic products.
••The battery is not charged when the camera is shipped. Charge the battery and set the clock before use.
••Charge the battery with the charger indoors (10 °C - 35 °C) (50 °F - 95 °F).
Insert the battery terminals and attach | 1 |
the battery to the charger |
|
Ensure [LUMIX] faces outwards. | 2 |
10 VQT2L41 (ENG)
Recording conditions by CIPA standard
••CIPA is an abbreviation of [Camera & Imaging Products Association]. ••[NORMAL PICTURE] Mode
••Temperature: 23 °C (73.4 °F)/Humidity: 50% when LCD monitor is on.∗ ••Using a Panasonic SD Memory Card (32 MB).
••Using the supplied battery.
••Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer function is set to [AUTO].)
••Recording once every 30 seconds with full flash every second recording.
••Rotating the zoom lever from Tele to Wide or vice versa in every recording.
••Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases.
∗The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
(ENG) VQT2L41 11
