Panasonic DMC-FP3 Printing, Touch PictBridge PTP on the camera, To cancel print

Printing

You can connect directly to a PictBridge- compatible printer for printing.

Getting Ready:

•Use a fully charged battery or connect an AC adaptor (optional).

•When printing pictures from the built-in memory, remove any memory cards.

•Adjust the print quality or other settings on your printer, as needed.

Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)

• Do not disconnect the USB connection cable when the cable disconnection icon is displayed (may not

be displayed with some printers).

Hold here

(Push until it is fully inserted.)

Turn on power of both camera and printer

Connect camera to printer

•Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.

Touch [PictBridge (PTP)] on the camera

When [CONNECTING TO PC…] is displayed, cancel the connection and set [USB MODE] to either [SELECT ON CONNECTION] or [PictBridge (PTP)].

Select a picture to print with ◄► and touch [PRINT]

Touch [PRINT START]

If using AC adaptor, turn off	USB connection cable
the camera before plugging	(always use cable	(Print settings (→82))
in or removing.	supplied)

■To cancel print

Press [MENU]

●Do not use any other USB connection cables except the supplied one. ●Disconnect USB connection cable after printing.

●Turn off power before inserting or removing memory cards.

●If the battery runs out during communication, a warning beep will sound. Cancel printing and disconnect the USB connection cable. (Recharge the battery before reconnecting the camera and printer.)

●Setting the [USB MODE] to [PictBridge (PTP)] removes the need to make the setting each time the camera is connected to the printer.

80 VQT2P49