Preparation
Inserting and Removing the Card (optional)/the Battery
•Check that this unit is turned off.
•We recommend using a Panasonic card.
Slide the release lever in the direction of the arrow and open the card/battery door.
• Always use genuine Panasonic batteries
• If you use other batteries, we cannot guarantee the quality of this product.
Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.
Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.
B: Do not touch the connection terminals of the card.
• The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the direction of the arrow.
• If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.
12 VQT2G37 (ENG)
