Basic
•Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
If operation fails due to vibration, impact or static electricity, perform the operation again.
Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red.
¦> 
•Only when [‡] is selected
•[¦] is set if none of the scenes are applicable, and the standard settings are set.
•When [ 
], [ 
] or [ 
] is selected, the camera automatically detects a person’s face, and it will adjust the focus and exposure. (Face detection)
•If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the Scene Mode has been identified as [ 
], the shutter speed will be set to a maximum of 8 seconds.Take care not to move the camera while taking pictures.
•When [FACE RECOG.] is set to [ON], and the face similar to the registered face is detected, [R] is displayed in the top right of [ 
], [ 
] and [ 
].
¢When [FACE RECOG.] is set to [ON], [ 
] will be displayed for birthdays of registered faces already set only when the face of a person 3 years old or younger is detected.
AF Tracking Function
It is possible to set the focus to the specified subject. Focus will keep following the subject automatically even if it moves.
1Press 3.
• | [ | ] is displayed in the upper left of the screen. |
• | AF Tracking frame is displayed in the center of the | |
| screen. | |
•Press 3 again to cancel.
2Bring the subject to the AF tracking frame, and
press 4 to lock the subject.
• AF tracking frame will turn yellow.
•An optimum scene for the specified subject will be
chosen.
•Press 3 to cancel.
18 VQT2G37 (ENG)
