VQT2M46 (ENG)
14
1With the card/battery door and
terminal cover closed, rinse with
water, or if it was used in the sea,
soak the unit in fresh water pooled
in a shallow container for
10 minutes or less.
•If you have attached the silicon jacket,
be sure to rinse the camera after
removing it.
•Leaving the camera with foreign objects or saline matter on it may cause
damage, discolouration, corrosion, unusual odour, or deterioration.
2Wipe off the water, and dry the
camera by standing it on a dry
cloth in a well ventilated shaded
area.
3Confirm there is no water on the
camera, and open the card/battery
door and terminal cover.
4Wipe off any water or sand inside
the card/battery door and terminal cover with a soft dry cloth.
Caring of the camera after using it underwater
DMC-FT2&TS2GN-VQT2M46_eng.book 14 ページ ２０１０年２月９日　火曜日　午前８時４６分