VQT2M46 (ENG)
6
(Important) About the waterproof/dustproof and anti-shock performance of the camera•Please observe the following precautions, and avoid using this camera in any
situation where the camera is subject to high water pressure. This camera’s
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.
Provided the care and maintenance guidelines described in this document are
strictly followed, this camera can operate underwater, to a depth not exceeding
10 m for a time not exceeding 60minutes.¢1
•This camera also complies with “MIL-STD 810F (Method516.5-Shock)”. The
camera has cleared a drop test from a height of 2m onto 3 cm thick plywood. In
most cases this camera should not sustain any damage if dropped from a height
not exceeding 2m. ¢2
•Supplied accessories are not waterproof (excluding hand strap/silicon jacket).
¢1 This means that the camera can be used underwater for specified time in
specified pressure in accordance with the handling method established by
Panasonic. This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
¢2 This does not guarantee no destruction, no malfunction, or waterproofing in all
conditions.
Observe the following precautions and avoid using under water pressure
exceeding the guaranteed performance, and in an environment with
excessive dust or sand.
Waterproofing is not guaranteed if the unit is subject to an impact as a result
of being hit or dropped etc.
If an impact to the camera occurs, it should be inspected (subject to a fee) by
a Panasonic’s service centre to verify that the waterproofing is still effective.
Any malfunction caused by customer misuse, or mishandling will not be
covered by the warranty.
Note
•The picture can become whitish if there is dirt e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.
DMC-FT2&TS2GN-VQT2M46_eng.book 6 ページ ２０１０年２月９日 火曜日 午前８時４６分