Panasonic DMC-FT2 Maintenance and waterproof performance

VQT2M46 (ENG)
8
Maintenance and waterproof performance
∫To prevent water leaking into the camera, observe the following
items before using it.
∫Check that there is enough remaining battery power or memory in
the card.
∫Do not open or close the card/battery door or terminal cover in
places with sand and dust, near water, or with wet hands.
∫At purchase, the [LOCK] switch is in the locked state. When opening
the card/battery door and terminal cover, first release the lock.
•Release the lock by sliding the [LOCK] switch in the direction of the arrow until
the red area becomes visible, and open the card/battery door and terminal
cover.
A: [ LOCK] switch (grey part)
B: Loc ked state
C:Red part
D: Releas ed state
DMC-FT2&TS2GN-VQT2M46_eng.book 8 ページ ２０１０年２月９日 火曜日 午前８時４６分