13
(ENG) VQT2M41
1:With the [LOCK] switch released, close the card/battery door and terminal cover by pushing until you hear a click.•To prevent water seeping into the camera, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
•Closing the door with the [LOCK] switch in the locked state may result in
damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow until the visible red portion is no longer visible and the switch is locked.•If you use the camera without securely closing the door and cover, it may
open and close of its own accord.
Note
•If there is any foreign object, remove it
with attached brush.
•Sand and dust etc. will unintentionally
adhere to the camera by lodging in
between the gap around the card/
battery door or terminal cover when
used in the following locations:
–Where sand is floating, such as in the
sea or water etc.
–Where there is a lot of sand or dust,
such as at the beach or in a sand box
etc.
•To prevent unintentional opening of the card/battery door and terminal
cover, it is recommended to use the supplied silicon jacket.
N:Red part
O: [ LOCK] switch (grey part)
P: Releas ed state
Q: Loc ked state
DMC-FT2&TS2EB-VQT2M41_eng.book 13 ページ ２０１０年１月２９日 金曜日 午後７時５９分