Panasonic DMC-FX07K About the Built-in Memory DMC-FX3, Icons displayed on the screen

Preparation

About the Built-in Memory (DMC-FX3)

•The built-in memory is only available in DMC-FX3.

∫Built-in Memory [ ]

You can record or play back pictures on the built-in memory when you are not using a card.

•The built-in memory capacity is about 13.5 MB.

•Picture size is fixed to QVGA

(320k240 pixels) when recording motion pictures to the built-in memory. (P63)

∫Card [ ]

You can record or play back pictures on a card.

(The built-in memory cannot be used when a card is inserted.)

∫Access to the built-in memory or the

card

•The access indication lights red when pictures are being recorded on the built-in memory.

•Do not do the following when the access indication is lit, pictures are being read or deleted or the built-in memory is being formatted (P90):

–Turn the camera off.

–Remove the battery or the card (if used).

–Shake or impact the camera.

–Disconnect the AC adaptor (DMW-AC5;

optional). (When using the AC adaptor.) The card or the data may be damaged and the camera may not operate normally.

Icons displayed on the screen:

3	)
(
(	)

A: When using the built-in memory

B: When accessing the built-in memory

C: When using the card

D: When accessing the card

•Picture data recorded on the built-in memory or a card can be copied from the built-in memory to the card or vice versa. (P89)

•The built-in memory (about 13.5 MB) can be used as a temporary storage device when the card being used becomes full.

•The data on the built-in memory or the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc.

•The access time for the built-in memory may be longer than the access time for a card. (Max. about 7 sec.)

17

VQT0Y69