Panasonic DMC-FX07K operating instructions Aspect Conv, Press 3/4 to select or and then press Menu

Menu Settings

[ASPECT CONV.]

Changing the aspect ratio of a 16:9 picture

Press [ MENU/SET ] to display the [PLAY] mode menu and select the item to set. (P79) You can convert pictures taken with a

[ ] aspect ratio to a [ ] or a [ ] aspect ratio.

1Press 3/4 to select [ ] or [ ] and then press [MENU/

SET].
PLAY		2/3
PROTECT
AUDIO DUB.
RESIZE
TRIMMING
ASPECT CONV.			MENU
SELECT	SET	MENU
			/SET
• Only pictures taken with a [			]

aspect ratio can be converted.

•You may not be able to convert pictures taken on other equipment.

2Press 2/1 to select a picture and then press 4.

ASPECT		100_0001
CONV.
		1/3
SELECT	SET	EXIT MENU

•If you select and set a picture with an

aspect ratio other than [ ], the message [CANNOT BE SET ON THIS PICTURE] is displayed on the screen.

3 Press 2/1 to determine the horizontal position and press the shutter button to set.

ADJUST.

SET:SHUTTER EXIT MENU

88

•Use 3/4 to set the frame position for pictures rotated vertically.

•The message [DELETE ORIGINAL PICTURE?] appears.

4 Press 3/4 to select [YES] or [NO] and then press [MENU/SET].

ASPECT CONV.
DELETE ORIGINAL
PICTURE?
YES
NO
CANCEL SELECT SET MENU	MENU
	/SET

•The picture is overwritten when you select [YES]. If you convert the aspect ratio of a picture and then overwrite it, you cannot restore it.

•A picture with the converted aspect ratio is newly created when you select [NO].

•When the original picture is protected, you cannot overwrite it. Select [NO] and newly create a picture with the converted aspect ratio.

5 Press [MENU/SET] twice to close the menu.

•After converting the aspect ratio, the picture size may become larger than that of the original picture.

•The following pictures cannot be converted.

–Pictures with audio

–Motion pictures

•Files that do not conform to the DCF standard cannot be converted. DCF is an abbreviation of “Design rule for Camera File system”, stipulated by “JEITA (Japan Electronics and Information Technology Industries Association)”.

VQT0Y69