Panasonic DMC-FX07K operating instructions Press 2/1 to select the picture and then press 4 to set

Basic

3 Press 2/1 to select the picture and then press 4 to set.

(Only when selecting [MULTI DELETE])

MULTI DELETE

7 8 9

10 11 12

SELECT DELETE

MARK/UNMARK EXIT MENU

•Repeat the above procedure.

•[ ] appears on the selected pictures. If 4 is pressed again, the setting is canceled.

•The icon [ ] blinks red if the selected picture is protected and cannot be deleted. Cancel the protect setting and then delete the picture. (P84)

4Press [].

5Press 3 to select [YES] and then press [MENU/SET] to set.

(Screen when selecting [MULTI DELETE])

MULTI DELETE

DELETE THE PICTURES

YOU MARKED?

	YES
	NO
			MENU
SELECT		MENU	/SET
		SET SET

•[DELETE ALL PICTURES

IN THE MEMORY CARD?] is displayed when using [ALL DELETE] and

[DELETE ALL EXCEPT?] is displayed when using

[ALL DELETE EXCEPT].

•When you delete all pictures, only pictures in either of the built-in memory or the card can be deleted. (You cannot delete pictures in both the built-in memory and the card at the same time.) (DMC-FX3)

•If you press [MENU/SET] while deleting pictures using [ALL DELETE] or

[ALL DELETE EXCEPT], the deleting will stop halfway.

•Once deleted, pictures cannot be recovered. Double-check pictures before deleting them.

•Do not turn off the camera while deleting.

•When deleting pictures, use a battery with sufficient battery power (P13) or the AC adaptor (DMW-AC5; optional).

•It is possible to delete up to 50 pictures at one time using [MULTI DELETE].

•The greater the number of pictures the longer it takes to delete them.

•If there are pictures that are protected

[ ] (P84), do not conform to the DCF standard (P33) or are in a card with the

Write-Protect switch slid to the [LOCK] side (P16), they are not deleted even if [ALL DELETE] or

[ALL DELETE EXCEPT] is selected.

35

VQT0Y69