SELECTING ANALOG AUDIO INPUT OR DIGITAL SELECTING THE SURROUND MODE AUDIO INPUT
Example: AUTO SURROUND
LISTENING THROUGH HEADPHONES
This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug.
Note that the speakers will automatically be turned off when the headphone jack is in use.
ENGLISH
DOLBY HEADPHONE MODE
This feature simulates the waveforms of the actual sounds heard from the speakers.
When headphones are used, the MENU button automatically switches to the Dolby headphone mode.
The OSD that appears when the MENU button is pressed is shown below.
NAMES AND FUNCTIONS |
If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures.
Press the AMP button and press the A/D button. When this button is pressed, the input mode is switched in the following sequence.
→HDMI Auto → HDMI → Digital → Analog → HDMI Auto....
In HDMI Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.
If no digital signal is being input, the analog input jacks are selected automatically.
In Digital and HDMI mode, input is fixed to an assigned digital input terminal.
In analog mode, the analog input jacks are selected. This selecting is temporary, so the result will not be stored in memory.
If you need to change the input mode completely, use INPUT SETUP in OSD menu system. (see page 21)
To select the surround mode during playback, press the SURROUND MODE button on the front panel or the SURROUND MODE buttons on the remote controller.
NIGHT MODE
Press the NIGHT button on the remote controller to turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby Digital only, and it compresses the dynamic range. This softens loud passages such as sudden explosions, to help prevent disturbing others late at night.
To turn off the Night mode, press the NIGHT button again.
AAC
Notes:
•When using headphones, the surround mode will change to BYPASS and Dolby Headphone by MENU and Cursor button.
•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.
•The tone control function can not work through the headphones output.
| HEAD PHONE |
|
| |
DOLBY HP MODE : ON |
|
| ||
SURROUND | : OFF |
| ||
L | LEVEL | : | 0 | dB |
R | LEVEL | : | 0 | dB |
DOLDBY HP (Headphone) MODE can be selected with the left and right cursor buttons.
BYPASS → ON → BYPASS
BYPASS: Bypasses the Dolby headphone mode and delivers ordinary
ON: Dolby headphone mode active.
When the PURE DIRECT and SOURCE DIRECT mode is selected, Dolby surround processing is bypassed and “✽✽✽” is displayed as the mode indication.
The surround mode can be selected when mode is ON.
L/R LEVEL can be set in the ±10 dB range.
Notes:
•The surround mode returns to the previous setting as soon as the plug is removed from the jack.
•The Dolby Headphone function will not work when 32 or 96 kHz PCM digital signals are input.
BASIC | CONNECTIONS |
BASIC OPERATION | |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
27
