Marantz SR4003 English, 2-1SPEAKER SETUP, 2-2SPEAKERS SIZE, Subwoofer, Front L/R, Center, Basic

Models: SR4003

1 48
Download 48 pages 26.89 Kb
Page 24
Image 24
2-1 SPEAKER SETUP

1INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT)

Use this menu to select the input jack to be assigned to the input source.

1. Select “INPUT SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button.

1-1 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

TV :

AUTO

: - : -

: -

DVD :AUTO : 1

: 1

: 1

VCR :AUTO

:

3

:

3

:

3

DSS :AUTO

:

2

:

2

:

2

AUX1:AUTO : F : -

: -

MAIN

NEXT

EXIT

 

 

 

 

 

 

1-2

INPUT SETUP

 

FUNC:MODE :DIG:HDMI:COMP

------------------------

TAPE:AUTO : - :

:

CD/R:AUTO

: 4 :

:

AUX2:AUTO

: - :

:

MAIN RETURN

EXIT

2. To select the input source and MODE, press the 3 or 4 cursor buttons.

3. To select “DIG” “HDMI” or “COMP” for the input jack, press the 1 or 2 cursor buttons.

Select “AUTO” for input sources, for automatic detection of the digital input signal condition.

If there is not a digital signal present, but there is an analog signal present, the analog signal will be played.

Select “DIG”, when only a digital signal will be used. Select “ANA” for input sources for which no digital input jacks are used.

4. To select the vdieo source, select “HDMI” or “COMP” by pressing the 3 or 4 cursor buttons, and press the 1 or 2 cursor buttons to select the vdieo source to be assigned .

5. After you complete this portion of the set up, move the cursor to MAIN with the 3 or 4 cursor buttons and press the ENTER button.

Notes:

When the TUNER is fixed to the analog input, you can not select any digital input.

When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.

If “AUTO” is selected and a DVD, compact disc or LD is fast-forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to “DIG”.

2 SPEAKER SETUP

After you have installed the unit, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you first determine the following characteristics:

1. Select “SPEAKER SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button.

2-1 SPEAKER SETUP

Speakers are set up by selecting either MANUAL or AUTO using the 1 and 2 cursor buttons. For operation when AUTO has been selected, see MRAC on page 23.

2-1 SPEAKER SETUP

SPEAKER SETUP : MANUAL

MAIN

NEXT EXIT

2-2 SPEAKERS SIZE

When setting the speaker size in the SPEAKER SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel you are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting lower than approx. 100 Hz will be output from the subwoofer.

If the Subwoofer is set to “NONE”, the setting of the front speakers will be fixed to “LARGE,” and the sound will be output from both the left and right speakers.

2-2 SPEAKERS SIZE

SUBWOOFER

: YES

FRONT L/R

: LARGE

CENTER

: SMALL

SURROUND L/R

: SMALL

SURR.BACK

: 2CH

SURR.BACK SIZE

: SMALL

LPF/HPF

: 100Hz

BASS MIX

: BOTH

MAIN

NEXT EXIT

ENGLISH

1. To select the each speaker, press the 3 or 4 cursor buttons.

2. To select the setting of each speaker size, press the 1 or 2 cursor buttons.

3. After you complete this portion of the set up, move the cursor to “NEXT” with the 3 or 4 cursor buttons and then press the ENTER button to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

If “NONE” is selected for the Subwoofer setting, then this setting is fixed to “LARGE.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are connected.

LARGE:

Select if the surround left and right speakers are large.

SMALL:

Select if the surround left and right speakers are small.

SURR. BACK

NONE:

Select if no surround back left and right speakers are connected.

2CH:

Select if the surround back left and right speakers are connected.

1CH:

Select if the one surround back speaker is connected.

In this case, the audio signal is emitted form the Surround back L output terminal.

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

21

Page 24
Image 24
Marantz SR4003 English, 2-1SPEAKER SETUP, 2-2SPEAKERS SIZE, Subwoofer, Front L/R, Center, Surround L/R, Surr. Back, Basic