ENGLISH
NAMES AND FUNCTIONS | NAMES AND FUNCTIONS |
|
| |||
FRONT PANEL |
|
|
|
|
| |
BASIC CONNECTIONS | q w e rt y u i o !0!1 !2 !3 | |||||
|
|
|
|
|
| |
BASICOPERATION | DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK | ATT ANALOG | SURROUND |
| ||
SLEEP AUTO SURR DIRECT DISC 6.1 | MTX 6.1 SPKR B | EQ DIGITAL | DIGITAL |
|
| |
|
|
| ||||
|
|
| L C | R |
| |
|
|
| AAC PCM | LFE |
|
|
|
|
|
|
|
| |
|
|
|
| SL S | SR |
|
ADVANCED CONNECTIONS | !9!8 !7!6 |
| !5 | !4 | ||
| q POWER switch and STANDBY | t | PURE DIRECT button and | |||
| indicator |
|
| indicator |
|
uMENU button
Press this button to enter the SETUP MAIN MENU.
iEXIT button
Press this button to exit from the SETUP MAIN MENU.
oBAND button
Press this button to switch between FM and AM in the TUNER mode.
!0
Press this button to select the auto stereo mode or mono mode when the FM band is selected.
“AUTO” indicator will be illuminated in the display. (See page 16)
!1 MEMORY button
Press this button to enter the tuner preset memory numbers or station names. (See page 30)
!2 CLEAR button
Press this button to cancel the
!5 AUX1 INPUT jacks
These auxiliary video/audio input jacks accept the connections of a camcorder, portable DVD, game etc.These jacks are protected by the jack cover when these are not using.
Open and close the cover using the tab.
Front AUX jack cover
ADVANCED
SETUPTROUBLESHOOTING OPERATION
When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated.
wINPUT SELECTOR knob (AUDIO/ VIDEO)
This knob is used to select the input sources. (See page 15)
eSURROUND MODE button
Press this button to select the surround mode.
rAUTO (Auto surround) button
Press this button to select the AUTO mode from the surround modes. When this mode is selected, the unit determines the surround mode corresponding to a digital input signal automatically.
When this button is pressed once, “SOURCE DIRECT” appears on the FL display. If pressed again, “PURE DIRECT” appears. After 2 seconds, the FL display indication goes out, and then the video output signal stops.
In the source/pure direct mode, the tone control circuitry and bass management are bypassed.
Notes:
•The surround mode is automatically switched to AUTO when the pure direct/source direct function is turned on.
•Additionally, speaker configurations are fixed automatically as follows.
Front SPKR = LARGE Center SPKR = LARGE Surround SPKR = LARGE Surround Back SPKR = LARGE Sub woofer = YES
yDISPLAY button
!3 VOLUME control knob
This knob is used to adjust the overall sound level. Turning the control clockwise increases the sound level. (See page 15)
!4 INFRARED receiving sensor area
This area receives infrared signals for the remote control.
!6 Cursor (1, 2, 3, 4) / ENTER button
Press these buttons to operate the SETUP MAIN MENU and TUNER function.
!7 DIGITAL INPUT (Front)
This is the optical digital audio input terminal.
The inputs accept digital audio signals from a DMP, GAME, or other digital source component.
!8 SETUP MIC jack
Automatically measure speaker characteristics using the included microphone
!9 HEADPHONE jack for stereo headphones
This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4” stereo phono
OTHERS | Press this button to change the FL display mode. | |
(See page 26) | ||
|
plug.
4