BASIC OPERATION
AMP OPERATION
TURNING ON THE UNIT
1. Connect the AC power cord to the wall outlet.
2. Turn on the power to the devices that are connected to the unit.
3. Press the POWER ON/STANDBY button on the unit. Each time you press the button, the power to the unit switches between on and standby.
To turn on the power with the remote controller, first press the AMP button and then press the POWER ON or SOURCE ON/OFF button on the remote controller.
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must first select the input source on the unit.
Example : DVD
To select DVD, turn the INPUT SOURCE knob on the front panel or simply press the DVD button on the remote controller.
After you have selected DVD, simply turn on the DVD player and play the DVD.
•As the input source is changed, the new input name will appear momentarily an OSD information on the video display. The input name will also appear in the display, on the
•As the input is changed, this unit will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source.
•When an audio source is selected, the last video input used remains routed to the VCR Output and Monitor Output. This permits simultaneous viewing and listening to different sources.
•When a Video source is selected, the video signal for that input will be routed to the Monitor Output jacks and will be viewable on a TV monitor connected to the unit.
If a component video input is connected to the DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.
ADJUSTING THE MAIN VOLUME
SURROUND
DIGITAL
AAC
Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOLUME 3 / 4 buttons on the remote controller.
To increase the volume, turn the VOLUME knob clockwise or press VOLUME 3 button on the remote controller, to decrease the volume, turn counterclockwise or press VOLUME 4 button on the remote controller.
Notes:
•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.
•However, when the channel level is set as described on page 22, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS & TREBLE) CONTROL
During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.
(Using the remote controller)
To adjust the bass effect, press BASS + or BASS
–on the remote controller.
To adjust the treble effect, press TREBLE + or TREBLE – on the remote controller.
Note:
The tone control function can work in the AUTO Surround, Stereo, Dolby PLIIx, DTS,
ENGLISH |
|
| |
TEMPORARILY TURNING OFF THE SOUND | NAMES AND | FUNCTIONS | |
| |||
To temporarily silence all speaker outputs such as | BASIC | CONNECTIONS | |
|
| ||
when interrupted by a phone call, press the MUTE |
|
| |
button on the remote controller. |
|
| |
This will interrupt the output to all speakers and the | OPERATION | ||
|
| ||
dubbing that may be in progress. |
|
| |
When the system is muted, the display will show |
|
| |
“MUTE” . | BASIC | ||
operation. | |||
Press the MUTE button again to return to normal |
|
| |
| ADVANCED | CONNECTIONS | |
| SETUP | ||
| ADVANCED | OPERATION | |
| TROUBLESHOOTING | ||
| OTHERS |
15