Marantz SR4003 manual Music Parameter, CH Input Level, CS Iicircle Surround II Parameter

5PL IIx (PRO LOGIC IIx)

MUSIC PARAMETER

Pro Logic IIx-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs.

In this mode, this unit include three controls to fine- tune the soundfield as follows.

5 PLIIx MUSIC PARAMETER

PARAMETER	: DEFAULT
PANORAMAA	: OFF
DIMENSION	:	0
CENTER WIDTH :		3

MAINEXIT

Select “PL IIx MUSIC” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

PARAMETER:

Select “DEFAULT” or “CUSTOM” with the 1 or 2 cursor buttons.

If you select “CUSTOM”, you can adjust three parameters as listed below.

PANORAMA:

Select the Panorama mode On or Off with the 1 or 2 cursor buttons.

Panorama wraps the sound of the front left and right speakers around you, for an exciting perspective.

DIMENSION:

Set the Dimension level between +3 and –3 level in 1 level intervals with the 1 or 2 cursor buttons. Adjust the soundfield either towards the front or towards the rear.

This can be useful to help achieve a more suitable balance from all the speakers with certain recordings.

CENTER WIDTH:

Set the Center width level between 0 and 7 in 1 level intervals with the 1 or 2 cursor buttons. Center Width allows you to gradually spread the center channel sound into the front left and right speakers.

At its widest setting, all the sound from the center is mixed into the left and right.

This control may help achieve a more spacious sound or a better blend for the front image.

If “NONE” was selected for the Center speaker setting, in the Speaker size set up menu, then this setting will not appear.

After you complete this portion of the set up, move cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

6 CS II(CIRCLE SURROUND II) PARAMETER

6 CSII PARAMETER

TRUBASS	:	0
SRS DIALOG	:	0

MAINEXIT

1. Select “CS II” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

2. To Select desired contents as below, press the

3 or 4 cursor buttons.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in 1 level interval with the 1 or 2 cursor buttons. TRUBASS produced by the speakers are an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects.

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 in 1 level intervals with the 1 or 2 cursor buttons. This can be popped out of the surround audio effects, allowing the listener to easily discern what the actors say.

If “NONE” was selected for the Center speaker setting, in the Speaker size set up menu, then this setting will not appear.

After you complete this portion of the set up, move cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

7 7.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for 7.1- channel input sources.

Here you will adjust the volume for each channel so that they are all heard by the listener at the same level.

7 7.1	CH. INPUT LEVEL
VIDEO-IN		:	LAST
FRONT L		:	0	dB
CENTER		:	0	dB
FRONT R		:	0	dB
SURR.R		:	0	dB
SURR.B	R	:	0	dB
SURR.B	L	:	0	dB
SURR.L		:	0	dB
SUB W		:	0	dB
MAIN				EXIT

1. Select “7.1CH INPUT” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

2. To select “VIDEO IN”, press 3 or 4 cursor button.

3. Using the 1 or 2 cursor buttons, select the video input source which is emitted from Monitor out in the 7.1 CH INPUT function.

The input source is switched by pressing the 1 or 2 cursor buttons as follows;

LAST ↔ TV ↔ DVD ↔ VCR ↔ DSS ↔ AUX1 ↔ V-OFF ↔ LAST ↔

Notes:

•When select LAST, the source is set previous source before 7.1 CH INPUT function is activated.

•When select V-OFF, no signal is emitted from monitor out terminal.

4.To Select desired channel , press the 3 or 4 cursor buttons.

5.Using the 1 or 2 cursor buttons, adjust the volume level of each channel.

6.After you complete this portion of the set up, move the cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

Notes:

•These settings will be memorized to 7.1CH INPUT source.

•This feature can be directly selected with the CH.SEL button of the remote controller.

ENGLISH

NAMES AND	FUNCTIONS
BASIC	CONNECTIONS
BASIC OPERATION
ADVANCED	CONNECTIONS
SETUP
ADVANCED	OPERATION
TROUBLESHOOTING
OTHERS

25