ENGLISH
NAMESAND FUNCTIONS | TUNER OPERATION | ||
Frequency scan step for AM is selectable. | |||
| |||
| Default setup is 10 kHz step, if your country’s | ||
| standard is 9 kHz step, Press BAND button on the | ||
| remote controller more than 6 seconds. Scan step | ||
BASIC CONNECTIONS | will change. |
| |
AUTO TUNING |
| ||
| Note: |
| |
| Preset memory for the tuner will clear by changing | ||
| this setup. |
| |
BASIC | 2. | 1. | |
| |||
OPERATION |
| 2. | |
| SURROUND | ||
|
| DIGITAL | |
| AAC |
| |
ADVANCED CONNECTIONS |
| 1. | |
(Using the unit) | |||
| |||
| 1. To select tuner and desired band (FM or AM), | ||
| press the BAND button on the front panel. | ||
| 2. Press the 3 or 4 cursor buttons on the front | ||
SETUP | panel for more than 1 second to start the auto | ||
tuning function. | |||
| |||
| 3. Automatic searching begins then stops when a | ||
| station is tuned in. | ||
ADVANCED OPERATION | (Using the remote controller) | ||
1. To select tuner and desired band (FM or | |||
| AM), press the BAND button on the remote | ||
| controller. |
| |
| 2. Press the TUNE 3 or 4 for more than 1 second | ||
TROUBLESHOOTING | on the remote controller. | ||
3. Automatic searching begins then stops when a | |||
| station is tuned in. | ||
| If tuning does not stop at the desired station, use to | ||
| the “Manual tuning” operation. | ||
OTHERS |
|
|
MANUAL TUNING
2. 1.
2.
SURROUND
DIGITAL
AAC
1.
(Using the unit)
1. To select tuner and desired band (FM or AM), press the BAND button on the front panel.
2. Press the 3 or 4 cursor buttons on the front panel to select the desired station.
(Using the remote controller )
1. To select tuner and desired band (FM or AM), press the BAND button on the remote controller.
2. Press the TUNE 3 or 4 on the remote controller to tune in the desired station.
DIRECT FREQUENCY CALL
1.
2. 3.
1. To select tuner and desired band (FM or AM), press the BAND button on the remote controller.
2. Press the F.DIRECT on the remote controller, display will show “FREQ - - -
3. Input your desired station’s frequency with the numeric buttons on the remote controller.
4. The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
SURROUND
DIGITAL
AAC
When in the auto stereo mode, AUTO indicator will be illuminated on the display.
The “ST” indicator is illuminated when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, press the
“AUTO” indicator is not illuminated, if FM stereo broadcasts are received in monaural and the “ST” indicator is not illuminated.
To return to auto stereo mode, press the
16