Marantz SR4003 English, Video On/Off, Video Convert, Hdmi, Notes of OSD menu, Names And, Basic

VIDEO ON/OFF

When no video signal is connected to the unit or a DVD, etc., is connected directly to your TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off, press the AMP button and press the V.OFF button.

SURROUND

DIGITAL

AAC

VIDEO CONVERT

When this function is activated, the video or S-video signal can be emitted from the video, S-video or component video output terminal.

To activate this function, select VIDEO CONVERT in PREFERENCE menu and set ENABLE.

Notes:

•The component video signal is emitted only from component video output terminal.

When the video equipment is connected by component terminal, connect the monitor and the unit by the component terminal.

•This function is unavailable for the REC out terminal.

•This function is unavailable for the still picture, fast forward and reverse playing of the video component.

•If, while attempting to use the video convert feature, the unit cannot synchronize with the display device, “NO SIGNAL” appears on the monitor, or noise is generated, this feature cannot be used. All of these signs are caused by equipment incompatibility; there is nothing wrong with the unit.

In such case, set VIDEO CONVERT in the PREFERENCE menu to DISABLE. Also, connect the video input signal to the display device via the MONITOR OUT terminal under VIDEO and the S-video input signal to the display device via the MONITOR OUT terminal under S-VIDEO.

Example:

Monitor is connected with the component.

S-VIDEO	VIDEO
	COMPONENT

VIDEO S-VIDEO

COMPONENT

The signal cannot be converted from the video to component or S-Video.

	VIDEO
COMPONENT	S-VIDEO

The signal cannot be converted from the component to the video or S-video.

ENGLISH

HDMI

HDMI	VIDEO
	S-VIDEO
	COMPONENT
VIDEO	HDMI
S-VIDEO
COMPONENT

Notes of OSD menu:

HDMI: OSD menu is not displayed.

VIDEO/S-VIDEO/component: VIDEO CONVERT of HDMI is not possible, thus the OSD menu is not displayed.

NAMES AND	FUNCTIONS
BASIC	CONNECTIONS
BASIC OPERATION
ADVANCED	CONNECTIONS

Notes of OSD menu:

•The setup menu can be displayed through all video out (COMPONENT, S-VIDEO, VIDEO).

•The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ON.

Note:

No setting information is displayed when the signal is emitted from the COMPONENT IN to

COMPONENT OUT.

•The setting informations (e.g. volume setting) are displayed through the S-VIDEO or VIDEO out when the VIDEO CONVERT function are set DISABLE. When the S-VIDEO and VIDEO outputs are used simultaneously, the setting informations are displayed through the S-VIDEO out only.

OPERATION

ADVANCED OTHERS TROUBLESHOOTINGSETUP

29