ENGLISH

 

 

 

 

 

 

 

 

 

 

NAMESAND FUNCTIONS

BASIC OPERATION (REMOTE CONTROLLER)

(When operating Marantz AV equipment products)

 

NORMAL MODE

 

 

 

 

 

This remote controller is preset with a total of 12 types

BASIC CONNECTIONS

of remote codes, including Marantz TV (television),

DVD, VCR (VCR deck), DSS (satellite broadcasting

 

 

tuner), TUNER, CD, CD-R, DMP, TAPE (tape deck),

 

AUX1, AUX2, and AMP (amplifier).

 

 

Learning is not necessary for Marantz products. You

 

can use these products without setting any codes.

BASIC

1. Press the SOURCE button.

 

For this example, press DVD.

 

 

 

 

Pressing the SOURCE button once changes

OPERATION

the remote control to the settings for the source

the SOURCE button twice (double-click). The

 

that was pressed.

 

 

To change the amplifier on other source, press

 

code is sent, and then the amplifi er source

ADVANCED CONNECTIONS

changes to DVD.

 

the remote controller lights the remote controller’s

 

SETTING THE BACK LIGHT

 

 

 

Pressing the Light button located on the side of

 

backlight.Pressing the button again while the backlight

 

is lit lights the backlight for another 2 seconds.

SETUP

To turn off back light, press and hold down the SET

and OFF button until SEND indicator blinks twice.

 

 

To turn on it again, press and hold down the SET and

 

ON button until SEND indicator blinks twice.

 

Initial is back light ON.

 

ADVANCED OPERATION

PRESET MODE

 

 

 

 

(When operating non-Marantz AV equipment

 

 

products)

 

 

 

 

This remote controller is preset with remote control

 

codes from AV equipment by other manufacturers.

 

The preset codes are TV, CD, DVD and DSS.

TROUBLESHOOTING

Settings can be made in one of two ways.

preset manufacturers, devices, preset numbers, and

 

When the preset codes are set, the following codes

 

are contained in the source button of the remote

 

controller.

 

 

 

 

See the attached manufacturer number list for the

 

other settings.

 

 

 

 

Remote controller

Corresponding preset

Device name

OTHERS

source name

code

 

TV

TV

Television

 

 

DVD

DVD

DVD player

 

CD

CD

CD player

 

DSS

SATELLITE

Satellite broadcasting

 

 

 

 

 

 

tuner equipment

Importants:

Some codes may be not match your equipment.

In this case, you can use LEARN mode to store these codes.

The preset codes do not cover full functions.

If you need extra function, use LEARN mode to store extra function.

Wen the batteries are getting weak, the preset procedure is not successful.

PROGRAMMING WITH THE 4-DIGIT CODE

1.

2.

 

1.

1. Press and hold down the SOURCE button for the appliance which should be controlled and press SET button until the SEND indicator blinks twice. Then back light flushes.

2. Press the 4-digit code by numeric buttons for appliance (code table at the end of this book) When the procedure is successful, the SEND indicator will blink twice.

Note:

If the indicator did not blink twice, then repeat steps 1 through 2 and try entering the same code again.

SCANNING THE CODE TABLE

2. 3.

2.

3.

5.

1. Switch on the appliance which should be controlled.

2. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice. Then back light flushes.

3. Aim the remote control at the appliance and slowly alternate between pressing INPUT 3 button and the SOURCE ON/OFF button for the appliance.

4. Stop when the appliance turns off.

5. Press ENTER button once to lock in the code.

CHECKING THE CODE

1. 2.

3.

1. 4.

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice then back light flushes.

2. Press the INFO button.

The SEND indicator will blink twice.

3. To view the code for first digit, press 1 once.

Wait 3 seconds, count the SEND indicator blinks (e.g. 3 blinks = 3) and write down the number.

Note:

If a code digit is “0”, the SEND indicator will not blink.

4. Repeat step 3 three more times for remaining

digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

RESETTING THE CODE

1.

1.

2.

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice.

Then back light flushes.

2. Press the below codes to reset.

TV : 1000

DVD : 2000

CD : 3000

DSS : 4000

The indicator will blink twice.

Note:

After this procedure, the selected SOURCE button is set initial code.

34

Page 37
Image 37
Marantz SR4003 Normal Mode, Setting the Back Light, Preset Mode, Programming with the 4-DIGIT Code, Checking the Code

SR4003 specifications

The Marantz SR4003 is a versatile home theater receiver that exemplifies the high standards of quality and performance for which Marantz is known. Designed specifically for audio enthusiasts, the SR4003 incorporates a range of advanced technologies and features that enhance the overall listening experience.

One of the standout features of the SR4003 is its robust amplification system. It delivers an impressive 100 watts per channel across seven channels, ensuring that even the most demanding audio signals are handled with ease. The receiver is also equipped with advanced circuitry that minimizes distortion, providing a cleaner and more dynamic sound. This makes the SR4003 an ideal choice for both music lovers and movie buffs alike.

The SR4003 supports a wide array of audio and video formats, including Dolby Digital, DTS, and signals up to 1080p. It features multiple HDMI inputs, allowing seamless connectivity with various high-definition devices such as Blu-ray players and gaming consoles. The inclusion of HDMI pass-through functionality gives users the convenience of switching between devices without having to change cables, all while maintaining high-quality video output.

Another noteworthy feature of the SR4003 is its multi-room capabilities. With zone 2 output, users can easily distribute audio throughout their home, allowing for separate listening experiences in different rooms. This is particularly useful for entertaining guests or having different family members enjoy their preferred media simultaneously.

Marantz has also placed a strong emphasis on user-friendly design in the SR4003. The intuitive interface, combined with an easy-to-navigate remote control, allows users to customize settings and configurations effortlessly. The built-in digital signal processing (DSP) features also provide users with multiple sound modes, ensuring an optimized experience for any type of content.

In terms of build quality, the SR4003 is a testament to Marantz's commitment to craftsmanship. Its robust chassis minimizes vibrations, while the high-grade components ensure durability and longevity. The aesthetic design features a sleek, timeless look that complements any home entertainment setup.

Overall, the Marantz SR4003 is a well-rounded home theater receiver that combines power, versatility, and premium sound quality. Its array of features makes it a powerful centerpiece for any audio or home theater system, catering to the demands of modern home entertainment. Whether for casual listening or immersive movie nights, the SR4003 delivers a truly exceptional audio experience.