![](/images/new-backgrounds/1262216/26221631x1.webp)
Preparation
Inserting/Removing the Card
•Check that the camera is turned off and that the lens is retracted.
•Close the flash.
1 Slide the card/battery door to open it.
•The card and the data may be damaged if it is inserted or removed while the camera is on.
•We recommend using Panasonic’s SD Memory Card. (Use only the genuine SD card with SD Logo.)
2Insert:
Insert the card with the label facing the front of the camera until it clicks.
Remove:
Push the card until it clicks, then pull the card out upright.
•Check the direction of the card.
•Do not touch the connection terminals on the back side of the card.
•The card may be damaged if it is not fully inserted.
3 1 Close the card/battery door.
2Slide the card/battery door to the end and then close it firmly.
•If the card/battery door cannot be completely closed, remove the card and insert it again.
16