Connecting to a PC or Printer
Connecting to a PC
•If you use Windows 98/98SE, install the USB driver and then connect it to the computer.
•When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USB driver.
1 Turn the camera on and set the [USB MODE] according to the OS you use.
•Set to [PC] or [PictBridge (PTP)]. Refer to “Before Connecting with USB Connection Cable” on page 93.
•If [USB MODE] is set to [PictBridge (PTP)] while Windows XP or Mac OS X is used, it is connected as PTP.
2 Connect the camera to a PC via the USB connection cable A (supplied).
•Connect the USB connection cable with the [ ] mark facing you.
•Hold C and then insert or pull the USB connection cable straight.
Depending on the USB mode setting, the indications on the screen may vary. Refer to page 96.
A: USB connection cable (supplied)
B: AC adaptor
95