Recording pictures (advanced)

Using the Mode Dial

Aperture-priority AE

When you want the background to be in sharp focus, set the aperture value to a higher number. The higher the aperture value is the smaller the aperture opening will be. For a soft focus background, set the aperture value to a lower number which corresponds to a larger aperture opening.

1 Set the aperture value and take the picture.

ISO100 2304

19

F2.8

EXPOSURE

Refer to P55 for the available range of the aperture value and the shutter speed.

The focus range is 0.16 feet (5 cm) – (Wide), 6.56 feet (200 cm) – (Tele).

If the subject is too bright, set to a larger aperture value, if too dim, set to a smaller aperture value.

The brightness of the screen may differ from that of the actual pictures. Check it using review function or setting to the playback mode.

The ISO sensitivity cannot be set to [AUTO]. (P70) (When the recording mode is switched to Aperture-priority AE, the ISO sensitivity is automatically set to [ISO100] even though it was set to [AUTO] beforehand. Even though the ISO mode is set to [ISO100] automatically, you can also change ISO setting from [ISO64], [ISO200], [ISO400] on the menu.)

When the exposure is not adequate, the aperture value and the shutter speed on the screen turn red.

51

Page 51
Image 51
Panasonic DMC-FZ15P Using the Mode Dial, Aperture-priority AE, Set the aperture value and take the picture