Panasonic DMC-FZ18 operating instructions 124

Models: DMC-FZ18

1 171
Download 171 pages 61.6 Kb
Page 124
Image 124

Others

[MEMORY CARD ERROR FORMAT THIS CARD?]

The card format cannot be recognized by the camera. Format the card again with the camera after saving necessary data on a PC etc. (P110)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]

This message appears when the camera did not operate properly because force was applied to the lens by a hand or other object, or the hood adaptor is not securely attached. Turn the camera off and on. If the message is still displayed, contact the dealer or your nearest Service Center.

[MEMORY CARD PARAMETER ERROR] Use a card compatible with this unit. (P5, 16)

You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

[MEMORY CARD ERROR PLEASE CHECK THE CARD]

An error has occurred accessing the card. Insert the card again.

[READ ERROR

PLEASE CHECK THE CARD]

An error has occurred reading the data. Insert the card again. Make sure the card is inserted properly and then play back again.

[WRITE ERROR

PLEASE CHECK THE CARD]

An error has occurred writing the data. Turn the camera off and remove the card. Insert the card again and turn the camera on. Make sure the camera is turned off before removing or inserting the card to avoid damage.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

When you set the picture quality to [30fpsVGA] or [30fps16:9], we recommend using a High Speed SD Memory Card with “10MB/s” or greater displayed on the package.

124

Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording may stop in the middle.

[A FOLDER CANNOT BE CREATED]

A folder cannot be created because there are no remaining folder numbers that can be used. (P112)

Format the card after saving necessary data on a PC etc. (P110)

If you execute [NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. (P22)

[PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV]

The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once.

Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P23)

This message also appears when the USB connection cable is connected to the camera only.

In this case, connect the other end of the USB connection cable to a PC or a printer. (P111, 113)

[PLEASE RE-CONNECT THE PRINTER.] This message will be displayed if you

change the mode dial to print mode [ ], while this unit is connected to a PC. If connecting the printer again, change the

mode to a mode other than [ ] and then check that no data is being transferred. ([ACCESS] appears on the LCD monitor while data is being transferred.)

[USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.]

This message will be displayed if you change the mode dial to a mode other than

print mode [ ] while this unit and the printer are connected.

Set the mode dial to [ ] again and then disconnect the USB connection cable. If printing, stop the printing and then disconnect the USB connection cable.

[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]

The printer cannot print. Check the printer.

VQT1F83

Page 124
Image 124
Panasonic DMC-FZ18 operating instructions 124

DMC-FZ18 specifications

The Panasonic DMC-FZ18 is a versatile bridge camera that has gained recognition for its impressive blend of advanced features and user-friendly design. Introduced in 2007, this model falls under the Lumix series and is celebrated for its compact size while offering the capabilities typically found in larger DSLR cameras.

At the heart of the DMC-FZ18 is a 8.1-megapixel CCD sensor, which delivers sharp images with a remarkable level of detail. This sensor is complemented by an impressive 18x optical zoom lens, with a focal length range equivalent to 28-504mm in 35mm terms. This extensive zoom range allows photographers to capture everything from wide landscapes to distant subjects without needing additional lenses.

The camera is equipped with Panasonic's Optical Image Stabilization (O.I.S.) technology, which helps reduce the effects of camera shake, particularly important when shooting at longer focal lengths or in low-light situations. This feature enhances the overall usability of the camera by allowing handheld shooting with reduced motion blur.

The DMC-FZ18 also boasts a high-performance Venus Engine III, which enables fast continuous shooting at up to 3 frames per second and quick autofocus. This engine plays a significant role in processing images efficiently, ensuring that the camera responds swiftly to a variety of shooting conditions.

One of the standout features of the FZ18 is its advanced image processing capabilities, which provide excellent low-light performance and vibrant color reproduction. The camera supports shooting in various modes, including manual, aperture priority, and shutter priority, catering to both beginners and experienced photographers alike.

For those interested in video recording, the FZ18 offers the ability to capture high-quality motion in 720p resolution, making it a solid choice for casual videographers. Additionally, the camera features a 2.5-inch LCD screen, which provides a clear view for composing shots and navigating through the camera's menu.

In terms of connectivity, the DMC-FZ18 includes options for easily transferring images to computers or printers, although it lacks some of the modern wireless capabilities found in newer models. Despite being an older model, the Panasonic DMC-FZ18 remains a reliable option for photography enthusiasts looking for a capable and compact camera that delivers quality performance across a wide range of shooting scenarios.