Panasonic DMC-FZ30EB operating instructions Inserting/Removing the Battery

Preparation

Inserting/Removing the Battery

•Check that the camera is turned off.

•Close the flash.

1 Slide the release lever in the direction of the arrow to open the battery door A.

3 1 Close the battery door.

2Slide the release lever as far as it will go in the direction of the arrow to close the battery door firmly.

CLOSE

OPEN

CLOSE

OPEN

•Please be sure to use genuine Panasonic batteries (CGR-S006E).

2Insert:

Insert the charged battery until it clicks.

Remove:

Slide the lock B to remove the battery.

•If you will not be using the camera for a long time, remove the battery.

•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (The storing time may be shorter if the battery is not charged sufficiently.)

If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again. (P20)

•Do not remove the card and the battery while the card is being accessed. The data on the card may be damaged. (P16)

•Do not remove the battery with the camera turned on since the settings on the camera may not be stored properly.

•The supplied battery is designed only for the camera. Do not use it with any other equipment.

14

VQT0S00