Recording Menu Settings
83
VQT0S00
∫Setting the White Balance manually
(White set )
Use this mode when you want to set the
white balance manually.
1Set to [ ] (White set), select
[WHITESET1] or
[ WHITE SET 2] and then press 1.
2Aim the camera at a sheet of white paper
or a similar white object so that the frame
in the centre is filled by the white object
only and then press 1.
∫Finely Adjusting the White Balance
(White Balance Fine Ad justment )
When you cannot acquire the desired hue
by setting the white balance, you can adjust
the white balance finely.
1Set the white balance to [ ]/[ ]/
[ ]/[ ]/[ ]/[ ]. (P82)
2Press 3 ( ) several times until
[WB ADJUST.] appears.
3Finely adjust the white balance.
•1 [BLUE]: Press when the hue is
reddish.
•2 [RED]: Press when the hue is
bluish.
About the white balance
•In auto mode [ ], the white balance is
fixed to [AUTO].
•When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [ ] (Daylight) and
[ ] (Flash)], but the whit e balance may
not be properly adjusted if the flash level
is insufficient.
About the white balance fine adjustment
•The white balance icon on the screen
turns red or blue.
•You can set the value independently for
each of the modes in white balance.
•The setting on the fine adjustment of the
white balance is reflected to the picture
when taking a picture with the flash.
•When you set the white balance using the
White set [ ], the adjustment level is
set to “0”.
•When the colour effect is set to any of
[COOL], [WARM], [B/W] or [SEPIA] (P9 1),
you cannot finely adjust the white balance.
WHITE SET
SET
CANCEL
MENU
WHITE SET
EXIT
MENU
SELECT
WHITE SET 2
WHITE SET 1
BLUERED
WB ADJUST.
SELECT EXIT