Panasonic DMC-FZ30EB Taking Pictures using Burst Mode, Select the burst mode

Recording pictures (basic)

Taking Pictures using Burst Mode

SCN1 SCN2

1 Select the burst mode.

5

: High speed

;

: Low speed

;

: Unlimited¢1

;

No display: cancelled

¢1 Depending on the memory size, battery power, picture size and quality (compression)

•Hold down the shutter button fully to activate the burst mode.

∫Number of pictures recorded in burst mode

Burst speed	Number of recordable
(pictures/	pictures (pictures)
second)
3¢2	max. 5	max. 9
2¢2	max. 5	max. 9
approx. 2	Depends on remaining
	capacity of the card

¢2 The burst speed is constant regardless of the transfer speed of the card.

•When the shutter speed is higher than 1/60 and the flash is not activated.

•When the burst mode setting is set to Unlimited

–You can take pictures until the capacity of the card becomes full.

–Depending on the transfer speed of the card, the burst speed may become slower halfway.

•The focus is fixed at taking the first picture.

•When using the self-timer or an extra flash with burst mode, the number of recordable pictures is fixed at 3.

•When the burst mode is activated, [AUDIO REC.] cannot be used.

•When the flash is activated or [STARRY SKY] (P79) in scene mode is selected, you can take only 1 picture.

•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.

•You cannot take pictures in burst mode when the quality is set to [TIFF] or [RAW].

57

VQT0S00