Making and Answering Calls
Telephone Light
•Light flashes and the display shows Call is on hold: a call is on hold. Press oor lift the handset to take the call off hold.
•Light flashes and the display shows Message Waiting: a mes- sage is waiting for you at your message or voice mail service† .
•Light flashes quickly and the ringer sounds: you have an incoming call.
•Light is on and the display shows Extension in use: an extension telephone is using the line. The message also appears when the telephone is not propertly con- nected to a phone line.
Using Hold key
Pressing oputs a handset or handsfree call on hold.
•You can hang up the handset without losing the call.
•The display will show the mes- sage Call is on hold.
•The telephone light will flash.
•To retrieve the call, lift the hand- set or press oagain. You can also press dto retrieve a Handsfree call.
Note: A call is taken off hold auto- matically after 15 minutes. If the handset is on the phone, the call will be disconnected. If the handset is off, the caller will be able to hear you again.
Adjusting the Volume
Pressing the volume button adjusts the receiver, headset, speaker, and ringer volume.
•To adjust the ringer volume, leave the handset in the cradle and press the volume bar u while there is no active call. There are 8 settings for the ringer – the display will tem- porarily indicate the current ringer volume setting.
•To adjust the handset volume, lift the handset and press the volume button while you are on a call.
The handset will return to the default volume after you hang up.
To adjust the speaker volume, press the volume button while the speaker is activated (activate the speaker by pressing d). The speaker will remain at this vol- ume until it is adjusted again.
†You must subscribe to a Message Waiting service for this feature to work. Consult your local telephone company for information.
8Model 480 User Guide
