Installation | Installation | |
Your Model 480 telephone can be | ||
| ||
| installed on a desk or mounted on | |
| the wall. To use the phone’s Call | |
| Waiting and Caller Identification | |
| capabilities, contact your local | |
| Service Provider for subscription | |
| details. Your Service Provider may | |
| call these services by different | |
| names. | |
| 1. Connect the handset cord | |
| Turn the telephone over and locate | |
| the handset jack marked j . | |
| Insert one end of handset cord into | |
| the jack until it clicks into place. | |
| Then route the handset cord | |
| through the groove as shown in the | |
| illustration below. | |
| Attach the handset to the other end | |
| of the handset cord. |
1
B
A
2
Handset groove
Handset cord
Handset
2. Attach the stand
If you plan to mount the phone on the wall, you do not need to attach the stand; skip this step. If you plan to use the phone on a desk, attach the stand by inserting the tabs on the stand (marked with o) into the slots on the bottom of the telephone
(A). For a higher viewing angle, use the slots marked n. For a lower
viewing angle, use the slots marked m. Then slide the stand towards the phone until it snaps into place
(B).
3. Connect the cords
If you attached the stand to install the phone on a desk, route both the phone cord and power adapter cord through the opening in the stand.
Insert the phone cord into the slot on the back of the telephone marked
luntil it clicks into place. Insert the power cord into the power jack marked k.
4. Press the cords into grooves
Press the cords into two of the grooves provided on the bottom of the stand. This will allow the stand to sit flat on a desk surface.
Power Adaptor | Stand | |
Line grooves | ||
|
4
3
Phone cord
5. Install the phone
If you have installed the stand and are using the phone on a desk: Simply turn the telephone over so it rests on the stand. Connect the phone cord to a phone jack and plug the power adapter into a power outlet.
Note: You should connect the power adaptor to a surge pro- tector or power bar.
4Model 480 User Guide
