Panasonic DMC-FZ30PP operating instructions 120, PictBridge PTP setting

Connecting to a PC or Printer

•If the remaining battery power is exhausted during communication, the recorded data may be damaged. When you connect the camera to the PC, use a battery with sufficient battery power (P13) or the AC adaptor (DMW-CAC1; optional).

•If the remaining battery power becomes low during communication, the power indicator blinks (P13) and the alarm beeps. In this case, stop the communication at once.

•While [ACCESS] is being displayed, do not disconnect the USB connection cable.

•When the OS of your PC is Windows 2000 and you connect the camera to the PC with the USB connection cable, do not replace the card with the camera connected to the PC. The information in the card may be damaged. Make sure to disconnect the USB connection cable beforehand when you replace the card. For details, refer to the separate operating instructions for PC connection.

•Do not use any other USB connection cables except the supplied one.

•Also refer to the operating instructions of the PC.

∫PictBridge (PTP) setting

Even if you set the [USB MODE] to [PictBridge (PTP)], you can connect to the PC only when the OS is Windows XP Home Edition, Windows XP Professional or Mac OS X.

•You can only load pictures from the camera and cannot write them on the card or delete them.

•When there are 1000 or more pictures on a card, the pictures may not be imported.

120

VQT0R81