Panasonic DMC-GF5 Touch the part you want to enlarge firmly, Using the Playback Zoom, 1k2k4k8k16k

Basic

Using the Playback Zoom

Touch the part you want to enlarge firmly. A

1k>2k>4k>8k>16k

•You can also enlarge/reduce the picture by rotating the control dial.

•When you change the magnification, the zoom position indication A

appears for about 1 second.

• The more a picture is enlarged, the more its quality deteriorates.

•You can move the enlarged part by dragging (P10) the screen.

•Picture will return to the original size (1k) by touching [ ].

•When you touch [ ], the magnification becomes lower.

Changing the information displayed on the playback screen

Press [DISP.] to switch the monitor screen.

•Screen will switch as follows:

DISP.

   

				F3.5		60
				1/98	0
				WB AWB		AFS
				ISO	160			P STD.
										F3.5	60
				10:00 DEC. 1.2012						0	ISO160
				AWB	2011.12.			1 10:00	1/98	100-0001
F3.5	60	0	160		s		100-0001
					RGB



AWith information¢1

BDetailed information display¢2 (P193) C Histogram display¢2 (P193)

D Without information (Highlight display)¢1, 2, 3, 4 E Without information¢4

¢1 If approximately 1 minute elapses without an operation being performed, part of the display will disappear. Press [DISP.] or touch the LCD monitor to make the display reappear.

¢2 It is not displayed during the Playback Zoom, while playing back a motion picture, or during slide show.

¢3 This is displayed if [Highlight] (P155) in the [Custom] menu is set to [ON].

¢4 If no operation is performed for a number of seconds, [ ] and other touch icons will disappear.

•Histogram is displayed in R (red), G (green), B (blue), and Y (luminance) during the playback.

- 54 -