Optical Image Stabilizer, MODE1, Off | Panasonic DMC-LS1PP instruction

Recording pictures (basic)

Optical Image Stabilizer

SCN1 SCN2

∫Demonstration of the optical image stabilizer (Demonstration Mode)

This mode recognizes and compensates jitter. You can reduce blurring caused by jitter especially when you take pictures with the optical zoom set to Tele or when you take pictures indoors where the shutter speed is slowed down.

A: Optical image stabilizer button

1 Press the optical image stabilizer button A until [STABILIZER] appears and then select the stabilizer function mode.

STABILIZER

OFF

MODE1

MODE2

SELECT DEMO. MENU SET

MODE1				The stabilizer operates
(		)		continuously and can assist
(		)		continuously and can assist
				during photo composition.

MODE2				The stabilizer function is in
(		)		standby and activates at the
(		)		standby and activates at the
				moment the shutter captures the
				image. This mode offers a
				greater degree of stabilization.

OFF				When image stabilization is not
(			)	needed or when using the
(			)	needed or when using the
				camera with a tripod.

When you press the [MENU] button, the demonstration appears. After the demonstration ends, the screen returns to the stabilizer function mode selection menu. If you want to exit the demonstration halfway through, press the [MENU] button again.

While the demonstration is displayed, the optical zoom is fixed to Wide (1k) and the zoom function cannot be activated.

Moreover, you cannot take pictures.

•The stabilizer function may not work sufficiently in the following cases.

–When too much jitter occurs.

–In digital zoom range.

–When taking pictures while following subjects in motion.

–When the shutter speed is extremely slow due to dark conditions or other reasons.

Be careful of jittering when pressing the shutter button.

•In simple mode [], the stabilizer function mode is fixed to [MODE2] and the

stabilizer function menu does not appear.

•In motion image mode [ ], [MODE2] cannot be set.

46

VQT0Q58

Image 46

Panasonic DMC-LS1PP operating instructions Optical Image Stabilizer, Optical image stabilizer button, MODE1, Off

Contents

Operating Instructions Information for Your Safety Dear Customer FCC Note U.S. only DMC-LS1 About Condensation When the lens Is fogged up About the Lens If you will not be using the camera for a long time About illustrations in these operating instructions When you press the 4 buttonAbout These Operating Instructions About illustrations of the cursor button Contents Slide Show Rotate DispDpof Print Trimming K1HA08CD0006 Standard AccessoriesK1HA08CD0004 VFC4090 Names of the Components 12 13 Quick Guide Play back the pictures About the Batteries When oxyride batteries are selectedWhen alkaline/Ni-MH batteries are selected Usable batteries Shapes of batteries that cannot be used Battery indicationUnusable batteries Proper Care and Handling Batteries Preparation Recording conditions by Cipa standard When you do not use batteries for a long period of timeBattery life Seconds Playback time Inserting/Removing the Batteries Inserting/Removing the Card Optional Slide the card door to open it Built-in Memory About the Built-in Memory/the CardHttp//panasonic.co.jp/pavc/global/cs Access to the built-in memory or the card Approximate number of recordable pictures and the size Card Select M/D/Y, D/M/Y or Y/M/D Setting Date/Time Clock SetInitial setting Set date and time About the Setup Menu Battery Type Alkaline LR6/Ni-MH No operational sound Economy Economy mode onlyPlayback mode only P82 Soft operational sound Scene Menu Playback mode P49 Recording mode P31Simple mode P35 About the LCD Monitor Histogram Recording guide lineExample of histogram Taking Pictures SCN Take a picture Turn the camera on Select normal picture modeNormal recording AF/AE Lock AF Auto focus AE Auto exposure Jitter camera shake FocusingDirection detection function Exposure Select the desired item and set the desired value Taking Pictures in Simple ModeSettings in Simple mode PICT.MODE Mail Other Settings in Simple mode PICT.SIZE Quality NO.RESET Reset USB Mode Video OUT LanguageCOL.EFFECT PICT.ADJ Press Checking the Recorded Picture ReviewEnlarge and shift the picture To make subjects appear further away use Wide Using the Optical ZoomTo make subjects appear closer use Tele Taking Pictures using the Built-in Flash Available flash settings by recording mode ISO64 Do not stare at the photo flash from close proximity Select the self-timer mode Taking Pictures with the Self-timerTake the picture Under exposed Compensating the ExposureProperly exposed Over exposed Taking Pictures using Auto Bracket MODE1 Optical Image StabilizerOptical image stabilizer button OFF Number of pictures recorded in burst mode Taking Pictures using Burst ModeSelect the burst mode When the burst mode setting is set to Unlimited Recording pictures basic Playing Back Pictures Select the picture Select the pictures Switch to multi screenPictures Multi Playback To return to the normal playback Shift the picture Using the Playback ZoomRotate the zoom lever towards To enlarge the picture Zoom Delete the picture Deleting PicturesSelect the picture to be deleted Select Multi Delete Select ALL Delete Delete the picturesDelete all of the pictures To delete all pictures Using the Mode Dial Economy mode Select Motion Rate Motion image modePress the shutter button fully to start the recording Available recording time seconds Motion images cannot be recorded with audio Scene mode Night Scenery P59 Night Portrait P60 Technique for Portrait mode To make this mode more effective Technique for Sports mode Scenery mode Technique for Night scenery mode Technique for Night portrait mode Use the flash Technique for Fireworks mode Party mode Technique for Party mode Using the REC mode menu White Balance W.BALANCE Auto White Balance About the white balance fine adjustment Setting the White Balance manually White setAbout the white balance ISO sensitivity 400 ISO Sensitivity SensitivityPicture Size PICT.SIZE Hdtv Quality Quality Slow shutter Setting Example Digital Zoom D.ZOOM Picture Adjustment PICT.ADJColor Effect COL.EFFECT Images Playing Back Motion ImagesMotion images To pause Using the Play mode menu Rotating the Picture Rotate Example When rotating clockwiseSelect on to set it Select the picture to be rotated and set it Select SINGLE, Multi or Cancel Setting the Picture to be Printed and the NumberSelect the direction to rotate the picture To cancel all settings Select YES to cancel all settings To print the date Preventing Accidental Erasure of the Picture Protect CancelSET Select Start Playing Back with Slide ShowSet the items of the Slide Show By pressing the Menu button, the Slide Show stops Select the size and set it Resizing the Pictures ResizeSelect the picture and set it SD Slide Show Select YES or no and set it Trimming the PicturesSelect the picture to trim and set it Enlarge or decrease the picture Shift the picture and press the shutter button to set Select pictures to be copied and set them Copying Picture Data CopySelect the direction to copy the picture data Select YES and set it Initializing the Built-in Memory Card Format Select YES to format the medium Playback advanced Playing back pictures with video cable supplied Playing Back Pictures on a TV ScreenConnect the video cable to the video input socket of the TV Playback pictures on TV with SD Memory Card slot Select USB Mode Before Connecting to the PC or the PrinterUSB Mode Select PC or PictBridge PTP Windows Connecting to a PCMacintosh Misc PictBridge PTP settingFolder Composition Dcim PICTURE. P87 Connecting to a PictBridge-compliant PrinterPICTURE. P88 Select a picture to be printed Set the print settingsSingle picture Select Dpof Picture Select Print Start and then print out the pictureDpof picture Setting the date printing with the Dpof print in advance Screen Display Recording Recording in simple mode Image Playback Others When you go out, bring spare batteries Dispose of unusable batteries Message Display No Additional Delete Selections can be Made Memory Card Error Recording Picture cannot be recorded TroubleshootingCamera cannot be operated even when it is turned on Subject is not focused properly Screen is too bright or dark When connecting to a PC, pictures cannot be transferredLCD monitor Some pixels are inactive or always lit on the LCD monitor Others Unreadable language was selected by mistake Clock setting is resetSetting for the auto review function is disabled Lens clicks Specifications Operating Temperature DimensionsWeight Flash Digital Camera Accessory System Accessory# Digital Camera Accessory Order Form For USA Customers Request for Service Notice For USA Only Limited Warranty For USA Only Limited Warranty Coverage Carry-In or Mail-In Service Customer Services Directory For USA Only Centralized Factory Servicenter NO.RESET Ntsc Index Numerics Playing Back Motion Images Spanish Quick Use Guide/Guía rápida en español Reproduzca las imágenes Memo Panasonic Puerto Rico, Inc Panasonic Canada Inc