Panasonic DMC-LS1PP Setting Date/Time Clock Set, Select M/D/Y, D/M/Y or Y/M/D, Set date and time

Preparation

Setting Date/Time (Clock Set)

∫Initial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.

PLEASE SET THE CLOCK

CLOCK SET MENU

2 Select [M/D/Y], [D/M/Y] or [Y/M/D].

CLOCK SET

10:001DEC.11.2005

M/D/Y

SELECT SET EXIT MENU

•When pressing the [MENU] button, the screen shown in step 1 appears.

•The screen disappears in about

5 seconds. Turn the camera on again or select [CLOCK SET] on the [SETUP] menu and then set the clock. (P24)

•Close the menu by pressing the [MENU] button 2 times after finishing the setting.

•Check if the clock setting is correct, after turning the camera off and on.

1 Set date and time.

CLOCK SET

00 : 00 JAN .11 . 2005

M/D/Y

SELECT SET EXIT MENU

•2/1: Select the desired item.

•3/4: Set date and time.

•When new batteries or fully charged Ni-MH batteries have been inserted for more than 3 hours, the clock setting will be stored (in the camera) for at least

3 months even if the batteries are removed. (The storing time may be shorter if the batteries are not charged sufficiently.)

If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•If you do not set the date, the date cannot be printed when you go to a photo studio for digital printing.

•For the date print setting, refer to P73.

23

VQT0Q58