Panasonic BB-HCM331A operating instructions IKE Items, Settings

			Operating Instructions
	IKE Items		Settings
Phase 2		Mode	Quick mode
		PFS	Specifies either of Off, D-H Group 1 or D-
			H Group 2.
		Cipher Algorithm	Select from DES-CBC, 3DES-CBC,
			AES-CBC (128, 192, 256 bits) or NULL.
			(Multiple selections are available.)
		Message-Digest	HMAC-MD5-96, HMAC-SHA-1-96
		Algorithm
		Lifetime	Specifies by 28800 s (Byte setting is not
			supported.)
*1 The camera does not support aggressive mode.

•Set up the IPsec policy as the following.

Items	Settings
Protocol	ANY
Source Network	Network address and subnet mask on the LAN side of the
	VPN router
Source IP address	A global address on the WAN side of the VPN router
Destination Network	A global address of the camera
Destination IP address	A global address of the camera

9.Access the camera (see page 12).

• If you can access the camera, the IPsec setup is complete.

Notes

•In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page.

•If you cannot communicate using IPsec, see 2.9 IPsec in the Troubleshooting section of the Installation/Troubleshooting.

•See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features.

[For assistance, please call: 1-800-272-7033] 57