Panasonic BB-HCM331A operating instructions Setting, Description

Operating Instructions

5.Click [Restart].

• The camera restarts, and the Top page is displayed.

Notes

•When you do not know the camera IP address while setting [Automatic Setup], you can search it by using the Setup Program (see page 133). Or you can search it on the Status page (see page 110) after accessing the camera in IPv4.

•If the camera is restarted, all buffered images on the internal memory are deleted. The buffered images on the SD memory card are not deleted.

Setting	Description
Allow Access from	• If [Yes] is selected at the Allow Access from the Internet,
the Internet	you can access the camera from the Internet. If [No] is
(Automatic Setup	selected, the camera can be accessed only from the LAN
Only)	that has an same IPv6 prefix as the camera.
Port Number (Static	• The port number is 80 by default. The port number must be
Only)	unique for each terminal on your network.
	• Do not set the following port numbers.
	E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,
	POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661—
	6667.
	• Enter only the number (1—65535).
	• Some ISPs do not allow you to use port 80. Ask your ISP
	or network administrator about the accessible port number
	over the Internet.
IP address	• Enter a global address. You do not need to enter prefix
(Static Only)	length.
	• IPv6 address consists of 8 hexadecimal digits divided with
	":". Consecutive 0s can be abbreviated as "::".
	(E.g. 2001:2:3:4::5)
Default Gateway	• If you have the assigned Default Gateway IPv6 address by
(Static Only)	your ISP or network administrator, enter it in this data field.
	• IPv6 address consists of 8 hexadecimal digits divided with
	":". Consecutive 0s can be abbreviated as "::".
	(E.g. 2001:2:3:4::5)

46