Panasonic BB-HCM331A operating instructions Not Encrypted, Tunnel Mode

Operating Instructions

Tunnel Mode (IPv4/IPv6)

An IPsec mode of operation where the entire IP packet including IP header is authenticated and encrypted. A new IP header is added (protecting the entire original packet). Both VPN clients and VPN gateways can use this mode.

Note

The camera can be accessed only from the PCs under the VPN router. Other PCs cannot access the camera.

LAN	WAN
	Tunnel Mode
Not Encrypted	Encrypted

Prepare the following requirements.

Item		Supported Feature
PC	Operating System	: Windows XP, Windows 2000, Windows
		Me, Windows 98SE (in IPv4)
		: Windows XP Service Pack 1 (in IPv6)
	Web Browser	: Internet Explorer 6.0 or later
Router	ISP Service	: Static global address service (A global
	(in IPv4)	address must be set up to the WAN side of
		the router.)
	ISP Service	: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
	(in IPv6)	Tunneling" service
	Note
	See the Panasonic Network Camera support website at
	http://panasonic.co.jp/pcc/products/en/netwkcam/ for
	the recommended router.
Camera	ISP Service	: Services for multiple global addresses (A
	(in IPv4)	global address must be set up to the
		camera.)
	ISP Service	: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
	(in IPv6)	Tunneling" service

50