Panasonic BB-HCM331A operating instructions Controlling External Output Terminal

Operating Instructions

2.24 Controlling External Output Terminal

The digital output terminal allows you to control the external devices. You can change the initial status of the output signal.

1.Click [External Output] on the Setup page.

2.Click [Save] when finished.

•Clicking [Cancel] cancels your settings without saving changes.

•New settings are saved.

•When finished, "Success!" is displayed.

Setting		Description
External Device	•	If you check [Open], the internal transistor turns off and the
Control Output		external output terminal gets high impedance (open
		collector) when the camera powers up. If you check [Short
		to GND], the internal transistor turns on and is electrically
		short-circuited to GND pin when the camera powers up.
		The external output terminal gets low impedance (0 V).
Button name	•	You can change the output control button names on the
modification		operation bar. You can name the button depending on your
		external devices.

3.Click [Go to External Output Control page].

• The External Output Control page is displayed.

[For assistance, please call: 1-800-272-7033] 107