
Operating Instructions
Basic
(1)Network (IPv4) Configures the IPv4 network settings to connect the camera to the network (see page 40).
(2)Network (IPv6) Configures the IPv6 network settings to connect the camera to the network (see page 44).
(3) | IPsec | Enables IPsec (Transport or Tunnel mode) (see page 48). |
(4) | UPnP | Enables automatic port forwarding or shortcut to the |
|
| camera (see page 58). |
(5)Viewnetcam. Registers with the Viewnetcam.com service (see page 60). com
(6)Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 62).
(7) | Camera | Sets camera name, white balance, pan/tilt range, return to |
|
| specified position and color night view settings (see page |
|
| 64). |
(8) | Audio | Sets output, volume, PC audio input timeout, input, camera |
|
| microphone sensitivity and mute during pan/tilt settings |
|
| (see page 68). |
|
| |
Account |
| |
(9) | Administrator*1 | Sets authentication setting and administrator security (user |
|
| name and password) (see page 70). |
(10) | General User*1 | Sets general user security (user name and password) and |
|
| general user's access level (see page 74). |
|
|
|
Advanced
(11)Image Display Sets resolution, image quality and refresh interval of Single Camera and
(12)
*1 If you change [Administrator], [General User], or
38